3D Milling Machine V1165
Number of control servo axes axis 3 AXIS
Work table size mm 1200×650
Work table load kg 800
T-slot of worktable (number-size×spacing) mm 5-18×120
Left and right stroke (X) mm 1150
Back and forth stroke (Y) mm 650
Up and down stroke (Z) mm 600
Spindle taper hole (specification/installation size) mm BT40
Spindle speed rpm 10000rpm
Spindle drive mode Belt
Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of 3d milling machine v1165 in China. If you're going to wholesale high quality 3d milling machine v1165 made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.


Precautions for purchasing 3D milling machine V1165"
Our attitude can be seen to extend the life of components and the wear cycle of parts, prevent various failures, and increase the average trouble-free working time and service life of machine tools.
Parameter

Problems that should be paid attention to in the use of CNC machine tools
1. The use environment of CNC machine tools. The CNC machine tools should be placed in a constant temperature environment and away from equipment with large vibrations (such as punching machines) and equipment with electromagnetic interference.
2. Power requirements-
3. Numerical control machine tools should have operating procedures for regular maintenance, maintenance, and attention to record failures to protect the site, etc.
4. CNC machine tools are not suitable for long-term storage
5. Pay attention to training and supporting operators, maintenance personnel and programmers




Maintenance of mechanical parts of 3D milling machine V1165
Maintenance of tool magazine and tool change manipulator
1. When manually loading the tool into the tool magazine, ensure that it is installed in place and check whether the lock on the tool holder is reliable.
2. It is strictly forbidden to load overweight and overlong tools into the tool magazine to prevent the tool from being dropped when the manipulator changes the tool or the tool collides with the workpiece, fixture, etc.
How does the computer automatically compile the NC machining program
What is automatic programming?
Automatic programming means that in the programming process, in addition to the analysis of the workpiece pattern and the formulation of the process plan by manual, the rest of the work is completed by the computer.
When computer automatic programming is used, the work of mathematics processing, programming, checking program, etc. is automatically completed by the computer. Because the computer can automatically draw the tool center movement track, the programmer can check whether the program is correct in time, and modify it in time to obtain the correct program. In addition, because the computer replaces the programmer to complete the cumbersome numerical calculations during automatic programming, the programming efficiency can be increased dozens of times or even hundreds of times, so it solves many programming problems of complex workpieces that cannot be solved by manual programming. According to the different input methods, automatic programming can be divided into CNC language automatic programming, CNC voice automatic programming, and CNC graphic automatic programming.
The programmer is writing the program
1) CNC language automatic programming means that the programmer uses the CNC language to compile the relevant information of the workpiece to be processed (such as the geometry of the workpiece, material, processing requirements or cutting parameters, feed route, use of tools, etc.) into a short source of the workpiece The program is input into the computer, and the computer pre-processes it through the pre-stored automatic programming system, translates the workpiece source program and calculates the tool position data, and finally obtains the instruction sheet that the CNC machine tool can accept from the post-processing. The output of the post-processing can be directly input into the memory of the CNC system through the communication interface.
2) CNC voice automatic programming is developed with the development of electronic technology. Voice programming refers to the use of human speech as the input medium. The programmer only needs to say various basic operations to the microphone, and the computer can automatically compile the numerical control processing program of the workpiece.
3) CNC graphics automatic programming is to use graphics input devices to directly input the graphics of the workpiece to be processed into the computer. There is no need to convert graphics information, which greatly reduces human errors. It has more advantages and wider adaptation than voice programming systems. Therefore, the efficiency and quality of programming are improved. In addition, because the output result of CAD is a graph, the information output by the CAD system can be used to generate an NC instruction sheet. Therefore, it can realize CAD/CAM integration. It is precisely because of the advantages of graphic programming that it is the development direction of automatic programming systems at present and even in the future, and it is dominant in automatic programming.
Hot Tags: 3d milling machine v1165, China, suppliers, manufacturers, factory, price, for sale, made in China, cnc machining ce standards, cnc machining warranty, cnc machining expertise, cnc brass machining, cnc machining productivity, cnc pvc machining
You Might Also Like
Send Inquiry











