News

Spindle nose specification A2-5 Taiwan top brand Fixture 6" Hollow Chuck Taiwan top brand ,taiwan top cylinder Recommended main motor power 7.5/11kw Maximum allowable spind...

Thanks to the customer from Egypt for ordering our CNC lathe. 8-inch machine, 12 turrets, equipped with the most advanced FANUC 0ITF system. GSK /SYNTEC systems are also configu...

Thank you our South Africa customer ordered our cnc lathe machine popular model JD-460 with FANUC 0ITF control system . 12T servo turret TAIWAN CHANDOX chuck chain type chip con...

Thank you customer from Mexico ordered our cnc machine center V850 ! MACHINE parameter as below :

Thank you customer from Russia order our popular model cnc lathe JD-460 with FANUC 0ITF 11/15KW spindle

Thanks to Russian customers for purchasing our CNC machine tool VMC1165 FANUC system machine V1165 for your reference with FANUC . Left and right stroke (X) mm 1100 Back and for...

CNC slant bed lathe machine with C axis Y axis Control system: FANUC 0ITF

Thank you customers for their trust and support in 2022! Order a V1165 to configure FANUC system. And it is equipped with TAIWAN "TJR" oil brake 4 axles and a disc tailstock! Th...

Thank overseas customers for ordering our CNC vertical machining center V1165, equipped with FANUC 0iMF system! 11/15KW large spindle power!

First place: chuck picture Century-old clamps are still busy in machine shops. Its classicness is self-evident. There are more chucks than lathes in the workshop. A lathe would ...

Formed part design Mold parts can be divided into formed parts and structural parts according to their functions. Formed parts refer to structural parts that directly participat...

For example: if the acceleration and deceleration time is set too small, the servo motor will produce high inertia jitter when it suddenly starts or stops... This problem can be...