High Rigidity Cnc Milling Machine

High Rigidity Cnc Milling Machine

Operating system Set SIEMENS 828D/FANUC
Number of control servo axes axis 3 axis
Work table size mm 1200×650
Max table load g 800
T-slot of worktable (number-size×spacing) mm 5- 18×120
Left and right stroke (X) mm 1100
Back and forth stroke (Y) mm 650
Up and down stroke (Z) mm 600
Spindle taper hole (specification/installation size) mm BT40
Spindle speed rpm 10000rpm
Spindle drive mode Belt type
Send Inquiry
Product Introduction

Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of high rigidity cnc milling machine in China. If you're going to wholesale high quality high rigidity cnc milling machine made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

 


-, High rigidity cnc milling machine basic configuration:

◆Taiwan P3 screw

◆Taiwan spindle unit

◆Taiwan screw special bearing

◆FANUC/SIEMENS/MITSUBISHI CNC system

◆Taiwan BT40-24T manipulator tool magazine

2. Product introduction and use:

The feed axis of the machining center is controlled by X, Y, and Z coordinates. The three axes are driven by a servo motor, which can achieve one-time clamping of complex parts such as various disks, plates, shells, cams, and molds to complete drilling, Milling, boring, expanding, comparing, tapping and other processes are suitable for the production of multi-variety, small and medium-sized parts, and can show its superiority for the processing of complex and high-precision parts.

cnc milling center

VMC1000

Parameter

vmc 1165

Reminder: the vertical machine center configuration is different, the price is different. Can be configured according to user requirements, support special machine customization, we will serve you wholeheartedly!


Vertical CNC  milling machine  analysis


High rigidity and high precision structure design

The main structural castings are made of high-quality Meehanite cast iron, which has been quenched twice to ensure high structural rigidity, high stability, and permanent quality.

The castings are calculated and analyzed by computer based on finite element analysis. The reasonable structural strength and the matching of reinforcing ribs improve the high rigidity of the machine.

The three-axis adopts linear rail support, which can support heavy loads and move quickly to ensure accurate positioning (users can choose to configure three-axis hard rail or two-wire and one hard rail according to processing requirements).


Large-span base. Effectively disperses gravity and processing force, which can load heavier workpieces.

The saddle has a short overhang, which greatly improves the dynamic accuracy.

200-liter sink, chip removal at the rear. The back-inclined base design has a large inclination angle of the drainage channel, and the chip liquid returns quickly, which can quickly wash away the chips, avoid accumulation in the machine, and achieve the function of rapid chip removal. x YZ three-axis rail and ball screw adopt automatic centralized oil lubrication system.

The best spindle head and column contact ratio design.

The spindle head adopts a built-in counterweight, and the feed is sensitive and accurate.

casting for cnc machine

Meehanite casting FC30


Taiwan Royal high-precision spindle, Taiwan AIMACH 24 disc tool magazine, spindle oil cooling system, adopt full duplex protection to prevent cutting intrusion from affecting accuracy.

Taiwan HIWIN screw rod, high precision, toughness and wear resistance, operation panel and hand wheel, high brightness work light

Taiwan HIWIN linear guide, precise, sensitive, high-efficiency base chip flushing system, cutting and blowing air on the side of the spindle

High-strength workbench, large load-bearing, pressure-resistant, wear-resistant, box-shaped beautiful back design and water tank chip box

cnc milling machine electric parts

Strict quality inspection of High rigidity cnc milling machine


1. Laser inspection (laser inspection). Each CNC machine tool must be laser inspected on each axis before leaving the factory, and then accurately corrected, so that it has extremely high positioning accuracy and repeat positioning accuracy.

2. Using the world-renowned RENISHAW brand laser inspection, in accordance with the strict German VDI3441 inspection specifications (5 round-trip inspections are held, and the statistical data is used)


Production workshop 

cnc milling machine

Service and training--after-sales guarantee is more worry-free


1. At the user site of the general machine tool equipment sold by our company, our after-sales personnel will come to provide free guidance on installation, commissioning, machine tool operation and maintenance training.

2. The quality of the whole machine is three guarantees for one year from the date of sale. The product spare parts and spare parts are free, such as the loss of accessories caused by Party A's improper use, the cost price will be charged. After the warranty period, life-long maintenance services are provided.

3. If there is a problem with the equipment, we will immediately have a professional response to understand and analyze the problem and usage status, and make a specific repair solution within 2 hours.

4. The maintenance personnel are all highly skilled personnel to ensure timely and accurate judgment and resolution of machine tool problems in the process of instructing users to use, debug and maintain, without leaving a tail.

5. In the process of service, the sales service personnel will make a file of each machine tool of the user, and timely cooperate with the user to do the regular maintenance work of the machine tool.




Hot Tags: high rigidity cnc milling machine, China, suppliers, manufacturers, factory, price, for sale, made in China, cnc milling workshop, cnc milling precision, cnc milling engraving production, cnc milling profiling, cnc milling code, Benchtop Cnc Mill

Send Inquiry

whatsapp

skype

E-mail

Inquiry