Small Metal Cnc Milling Machine

Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of small metal cnc milling machine in China. If you're going to wholesale high quality small metal cnc milling machine made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

Product introduction and usage

The small metal cnc milling machine is a semi-closed-loop vertical machining with X, Y, and Z three-axis servo direct control. The three axes are all steel ball rolling linear guides. The guide rail has large load, wide span and high precision. The three axes are 35MM linear guides. The guide rail is compact and reasonable in structure and size. The main shaft is driven by a servo motor through a synchronous belt. It can clamp complex parts such as various discs, plates, shells, cams, and molds. , Reaming, rigid tapping and other processes are processed, suitable for the production of multi-variety, small and medium batch products, and can meet the processing of complex and high-precision parts. It can be equipped with a fourth rotary axis to meet the processing requirements of special parts.

Machine parameter 

Small metal cnc milling machine installation conditions

a. Temperature

Operating temperature: room temperature 20±20°C

Storage and transportation: -30℃～50℃

Change rate: within 10°C/hour

b. Humidity

Continuous: 70% or less (no condensation) Short time: 95% or less (no condensation)

c. Installation site conditions

1. Not affected by external vibration

2. Not affected by corrosive gases

3. Avoid direct sunlight on the machine tool

4. Avoid direct contact with outside wind, air and temperature-regulated cold and hot air

5. Avoid setting heat sources such as heating equipment near the machine tool

6. Reduce dust (avoid casting, welding, sheet metal workshop, etc.)

7. Avoid water leakage and water immersion

d. Power supply: 3-phase 380V±10%; 50Hz±1Hz

Machine details 

Tool magazine
Disc/hat tool magazine, automatic tool change, saving man-hours; some models can choose 16 or 24 tool magazines.

CNC system
System brand optional: FANUC, GSK, SIEMENS, SYNTEC Long service life.

Spindle
Using high stability spindle, high processing efficiency, fast response, stable operation.

chip conveyor
The chip discharge port of the chassis facilitates the operator to clean up the iron filings and speeds up the production efficiency.

Taiwan guide rail
The ball guide rail is selected, which has high rigidity, low noise, low friction, and high sensitivity, which enhances the processing speed and precision.

HIWIN screw
The precision bearings are selected and equipped with high-precision and high-rigid lead screws and line rails inside to ensure the machining accuracy.

The small vertical machining center main castings such as the machine bed, saddle, worktable, column, and spindle box are all cast with high-strength inoculated cast iron and resin sand, and are treated with multiple aging processes to maintain the high rigidity and stability of the machine tool.
The guide rail of the machine tool adopts a rectangular sliding guide rail, and the surface of the guide rail is subjected to high-frequency quenching treatment, and is ground by a guide rail grinding machine. Guide rail attachment sheet, small friction coefficient, strong bearing capacity.
The spindle assembly of the machine tool has a large bearing arrangement and a large span, and is suitable for heavy-duty cutting with sliding guide rails.

The casting structure has been analyzed by FEM finite element, high rigidity structure, gravity cutting rigidity
●The base adopts a large-span design,
Provide high-rigidity support The contact surface between the column and the base has been manually shoveled to ensure assembly accuracy, structural strength and balanced load
●The workbench adopts the design of radial ribs to greatly increase the structural strength
The structure of the spindle head is strengthened with bones, and the ratio of the contact length between the spindle head and the column is appropriate to provide a stable support for the spindle

For many years, Gaode has provided high-application processing solutions for various fields of manufacturing industry, such as: aviation, automobile, shipbuilding, wind power, electronics, mold and other industries.

Hot Tags: small metal cnc milling machine, China, suppliers, manufacturers, factory, price, for sale, made in China, x-carve, cnc milling fixture, cnc milling solution, cnc milling finish, cnc milling collet, cnc milling power