
CNC Turning Machine Siemens
Maximum processing diameter 500 mm
Maximum processing diameter on pallet 280 ㎜
Maximum processing length 750 ㎜
Spindle speed range 100~4000 rpm
main motor power 11/15KW KW
Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of cnc turning machine siemens in China. If you're going to wholesale high quality cnc turning machine siemens made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

turning
The workpiece rotates and the turning tool moves linearly or curvedly in the plane during cutting. Turning is generally performed on a CNC turning machine siemens to process the internal and external cylindrical surfaces, end surfaces, conical surfaces, formed surfaces and threads of the workpiece.
The turning accuracy is generally IT8-IT7, and the surface roughness is 1.6-0.8μm.
1) Rough turning strives to use large cutting depth and large feed rate to improve turning efficiency without reducing the cutting speed, but the machining accuracy can only reach IT11, and the surface roughness is Rα20-10μm.
2) For semi-finishing and finishing turning, try to use high speed and smaller feed amount and cutting depth. The processing accuracy can reach IT10-IT7, and the surface roughness is Rα10-0.16μm.
3) High-speed precision turning of non-ferrous metal parts using finely ground diamond turning tools on a high-precision lathe can achieve a processing accuracy of IT7-IT5 and a surface roughness of Rα0.04-0.01μm. This kind of turning is called "mirror turning" ".

machine parameter
|
Machine model |
Parameter |
Unit |
|
Maximum rotation diameter of the bed |
600 |
㎜ |
|
Maximum processing diameter |
500 |
mm |
|
Maximum processing diameter on pallet |
280 |
㎜ |
|
Maximum processing length |
750 |
㎜ |
|
Spindle speed range |
100~4000 |
rpm |
|
main motor power |
11/15KW |
KW |
|
Maximum number of knives installed in the tool holder |
12 |
T |
|
X-axis travel |
250 |
㎜ |
|
Z-axis travel |
810 |
mm |
|
C axis |
360 |
degree |
|
X-axis/Z-axis minimum movement amount |
0.001/0.001 |
㎜ |
|
X-axis/Z-axis rapid traverse speed |
24/24 |
m/min |
|
Tailstock sleeve model |
5# |
MT |
|
Tailstock sleeve travel |
80/100 |
mm |
|
Total tailstock travel |
750 |
mm |
|
X-axis/Z-axis repeat positioning accuracy |
≤0.003/0.004 |
㎜ |
|
surface roughness |
≤0.63 |
um |
|
Spindle bore diameter |
Φ65 |
㎜ |
|
Bar hole diameter |
Φ52 |
㎜ |
|
Bed slope angle |
30 |
|
|
Overall dimensions (length x width x height) |
2360*2160*1950 |
㎜ |
|
Net weight of the complete machine tool |
4500 |
kg |
Standard Main parts
|
No |
item |
Parameter |
Brand |
Qt |
|
1 |
Spindle |
A2-6 |
Taiwan TaiDa |
1 |
|
2 |
Spindle motor servo |
11/15KW |
Japan Fanuc/SIEMENS |
1 |
|
3 |
Spindle motor power |
11/15KW |
Japan Fanuc/SIEMENS |
1 |
|
4 |
X-axis servo motor torque |
12nm |
Japan Fanuc/SIEMENS |
1 |
|
5 |
X-axis servo motor power |
2KW(brake) |
Japan Fanuc/SIEMENS |
1 |
|
6 |
Z-axis servo motor torque |
12nm |
Japan Fanuc/SIEMENS |
1 |
|
7 |
Z-axis servo motor power |
2KW |
Japan Fanuc/SIEMENS |
1 |
|
8 |
Linear guide (X-axis) |
45 |
TaiwanHIWIN/PMI |
2 |
|
9 |
Linear guide (Z axis) |
45 |
TaiwanHIWIN/PMI |
2 |
|
10 |
Screw (X-axis) |
(32/30) /10 |
Germany Rexroth/Taiwan HIWIN |
1 |
|
11 |
Screw (Z axis) |
40/10 |
Germany Rexroth/Taiwan HIWIN |
1 |
|
12 |
FANUC System |
OI-TF/SIEMENS 828D |
Japan Fanuc |
1 |
|
13 |
Rotary cylinder (hollow) |
8inch |
TAIWAN AUTO HUCK |
1 |
|
14 |
Hydraulic chuck (hollow) |
8inch |
TAIWAN AUTO HUCK |
1 |
|
15 |
hydraulic station |
40L/60L |
Made in Guangdong, China |
3 |
|
16 |
Hydraulic servo turret |
100 center height 12T |
Standard configuration Taiwan SWIFT/SANHE |
1 |
|
17 |
External tool holder |
Φ32 |
TURRET comes with |
1 |
|
18 |
End tool holder |
25/25 |
TURRET comes with |
1 |
|
19 |
Pressing block |
25X25 |
TURRET comes with |
8 |
|
20 |
Machine base |
integral casting |
self made |
1 |
|
21 |
Hydraulic tailstock |
Morse 5# |
self made |
1 |
|
22 |
Cover sheet metal |
self made |
1 |
|
|
23 |
Internal protection |
|
Homemade full protection |
1 |



To judge the level of a CNC turning machine siemens, it depends on its repeated positioning accuracy. If the repeated positioning accuracy of a machine tool can reach 0.005mm (ISO standard, statistical method), it is a high-precision machine tool. If it is 0.005mm ( ISO standards, statistical methods) and following are ultra-high-precision machine tools. High-precision machine tools must have the best bearings and screws.
When talking about the "accuracy" of CNC machine tools, it is important to clarify the definitions and calculation methods of standards and indicators.
When Japanese machine tool manufacturers specify "accuracy", they usually use JISB6201 or JISB6336 or JISB6338 standards. JISB6201 is generally used for general machine tools and ordinary CNC machine tools, JISB6336 is generally used for machining centers, and JISB6338 is generally used for vertical machining centers. The above three standards are basically the same when defining position accuracy.
This article only uses JIS B6336 as an example, because on the one hand, this standard is relatively new, and on the other hand, it is slightly more precise than the other two standards.
European machine tool manufacturers, especially German manufacturers, generally adopt the VDI/DGQ3441 standard.
American machine tool manufacturers usually adopt the NMTBA (National Machine Tool Builder's Assn) standard (this standard originated from a study by the American Machine Tool Builders Association and was promulgated in 1968 and later revised).
The standards mentioned above are all related to ISO standards.
Taking the dimensional accuracy and shape accuracy of typical parts processed by machining centers as an example to compare the levels at home and abroad, the domestic level is roughly 0.008~0.010mm, while the international advanced level is 0.002~0.003mm.
Although the development of my country's machine tool manufacturing industry has had ups and downs, it has always paid greater attention to CNC technology and CNC machine tools and has strong market competitiveness.
Ultra-precision machining currently refers to dimensional and positional accuracy of 0.01~0.3μm, shape and contour accuracy of 0.003~0.1μm, and surface roughness of steel parts Ra≤0.05μm and copper parts Ra≤0.01μm. Domestically developed ultra-precision CNC lathes and CNC milling machines have been put into production. At present, it is necessary to develop ultra-precision grinding machines and ultra-precision composite processing machine tools in terms of varieties. At the same time, it is necessary to further improve the ultra-precision spindle unit, ultra-precision guide rail sub-unit, ultra-precision stable drive system, ultra-precision contour control technology and nano-level resolution CNC system. performance and accelerate its engineering.
On the other hand, in-depth research on ultra-precision machining technology and the extension of its results will contribute to the development and industrialization of high-precision machine tools that require large quantities of machining accuracy at the sub-micron level.


Machine Packaging"
Vacuum packaging to prevent moisture/sunlight/rainwater + export fumigation wooden pallet packaging

Hot Tags: cnc turning machine siemens, China, suppliers, manufacturers, factory, price, for sale, made in China, CNC Turning And Milling Center, CNC Turning And Milling, CNC Hard Turning, CNC Turning Machine Siemens
Previous
CNC Turning And MillingYou Might Also Like
Send Inquiry










