Vertical Machining Center For Sale

Vertical Machining Center For Sale

Left and right stroke (X) mm 1150
Back and forth stroke (Y) mm 650
Up and down stroke (Z) mm 600
Work table size mm 1200×650
Spindle taper hole (specification/installation size) mm BT40
Spindle speed rpm 10000rpm 11KW/15kw
Spindle drive mode Belt
X-axis guide/line guide specification Sliding roller guideway
24 arm type tool magazine
Spindle oil cooling device
Send Inquiry
Product Introduction

Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of vertical machining center for sale in China. If you're going to wholesale high quality vertical machining center for sale made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

 




V11(1)


VMC1000



Vertical machining center for sale main configuration

1. Resin sand casting, three rails/two rails and one hard/three rails

2. Optional system brands: FANUC, GSK, Siemens, Kaind, New Generation, Mitsubishi.

3. Disc type tool magazine BT40-T24 (Taiwan Okada).

4. Three-axis roller rail (Taiwan HIWIN/PMI).

5. Precision lock nut (Yingxi, Taiwan).

6. Spindle made in Taiwan (Taiwan Way long  Taiwan Kenturn)

7. Taiwan-made supercharged cylinder (Airtac).

8. Imported bearings (Japan NSK, Germany FAG).

9. Coupling.

10. X, Y, Z (bottom) stainless steel rail protection.

11. Imported electronic lubrication pump (Japanese river valley)

12. Domestic cooling system includes water pump and water tank.

13. Pneumatic components (Airtac).

14. Optional: automatic chip removal (spiral/chain). 4th axis/5th axis; bamboo hat tool magazine.

15. With spindle oil cooling function, center air blowing.

16. Main electrical appliances: Schneider.

TJR 5AXIS


PARAMETR 



Parameter

Unit

V-1165

●

TRAVEL





X-axis travel

mm

1100


Y axis travel

mm

650


Z-axis travel

mm

600


Spindle nose to work surface

mm

130-730


Spindle center to column guide

mm

665

●

work table





Table Dimensions (L x W)

mm

1200*660


T-slot (number-size*spacing)

mm

5*18X100


maximum load

Kg

710

L

Spindle





Spindle speed

rpm

10000


Spindle motor power

kw

11/15kw


Spindle taper hole (model/installation size)


BT40(150)

●

feed





G00 rapid traverse (X axis)

m/min

36


G00 rapid traverse (Y axis)

m/min

36


G00 rapid traverse (Z axis)

m/min

36


G01 Cutting feed

m/min

12/12/12

●

machine precision





positioning accuracy

mm

0.005/300


Repeatability

mm

0.003/300

●

other





Floor space (length)

mm

2800


    (width)

mm

2450


Machine height (height)

mm

2500


machine weight

Kg

5800


Testing advanced device 


laser interferometer

The imported laser interferometer is used for factory Vertical Machining Center For Sale precision inspection and precision compensation, and the acceptance is strictly in accordance with German precision standards. The movement precision of the whole stroke is calibrated and compensated to ensure high-precision processing effect.


CMM

The key parts of the machine tool are measured with three coordinates and can only be assembled after 100% passing the test, which effectively guarantees the accuracy of the machine tool.


Ballbar

Install the two ends of the ballbar on the spindle and worktable of the machine tool respectively, measure the circular trajectory formed by the two-axis interpolation motion, and compare this trajectory with the standard circular trajectory, so as to evaluate and diagnose the dynamics of CNC machine tools precision


Dynamic balance detector

According to the highest grade G0.4 requirements of the IS01940 standard, the machine tool spindle and motor are dynamically balanced to improve the machining accuracy of the spindle.


test for cnc machine(1)(1)


About after-sales

Our company promises that all products sold in this store will enjoy the national three-guarantee policy of "one-year warranty and life-long maintenance"

After the goods arrive, the company will provide installation and commissioning services and technical guidance, and the system manufacturer will also provide system training and use.


cnc machine packing(1)


Vertical machining center for sale Nine major errors that are prone to occur in machining! Speaking from experience!


The size of the machining error reflects the level of machining accuracy. The main reasons for machining errors are as follows.


manufacturing error of machine tool


The manufacturing errors of machine tools mainly include spindle rotation errors, guide rail errors and transmission chain errors. Spindle rotation error refers to the variation of the actual rotation axis of the spindle at each moment relative to its average rotation axis, which will directly affect the accuracy of the workpiece being processed.


The main reasons for the rotation error of the main shaft are the coaxiality error of the main shaft, the error of the bearing itself, the coaxiality error between the bearings, and the winding degree of the main shaft. The guide rail is the benchmark for determining the relative positional relationship of each machine tool component on the machine tool, and it is also the benchmark for the movement of the machine tool. The manufacturing error of the guide rail itself, the uneven wear of the guide rail and the installation quality are important factors causing the error of the guide rail. The transmission chain error refers to the relative motion error between the transmission elements at the beginning and end of the transmission chain. It is caused by the manufacturing and assembly errors of the various components in the transmission chain, as well as the wear and tear during use.


Tool geometric error


Any cutting tool will inevitably produce wear during the cutting process, which will cause changes in the size and shape of the workpiece. The impact of tool geometric error on machining error varies with the type of tool: when a fixed-size tool is used for machining, the manufacturing error of the tool will directly affect the machining accuracy of the workpiece; for general tools (such as turning tools, etc.), the manufacturing error Has no direct effect on machining errors.


Geometry error of the fixture


The function of the fixture is to make the workpiece correspond to the correct position of the tool and the machine tool, so the geometric error of the fixture has a great influence on the machining error (especially the position error).


positioning error


The positioning error mainly includes the reference misalignment error and the manufacturing inaccuracy error of the positioning pair. When processing a workpiece on a machine tool, it is necessary to select several geometric elements on the workpiece as the positioning datum during processing. ) does not coincide, there will be a benchmark misalignment error.


The positioning surface of the workpiece and the positioning element of the fixture together constitute the positioning pair. The maximum position change of the workpiece caused by the inaccurate manufacturing of the positioning pair and the fit gap between the positioning pairs is called the inaccurate error of the positioning pair manufacturing. The inaccurate error of positioning pair manufacturing will only occur when the adjustment method is used, and it will not occur in the trial cutting method.


The error caused by the force deformation of the process system


Workpiece stiffness:


In the process system, if the workpiece stiffness is relatively low compared to machine tools, tools, and fixtures, under the action of cutting force, the deformation of the workpiece due to insufficient stiffness will have a greater impact on machining errors.


Tool stiffness:


The rigidity of the cylindrical turning tool in the normal (y) direction of the machined surface is very large, and its deformation can be ignored. When boring an inner hole with a small diameter, the rigidity of the tool bar is very poor, and the force deformation of the tool bar has a great influence on the machining accuracy of the hole.


Machine tool component stiffness:


Machine tool components are composed of many parts. So far, there is no suitable simple calculation method for the stiffness of machine tool components. At present, experimental methods are mainly used to measure the stiffness of machine tool components. Factors affecting the stiffness of machine tool components include the influence of contact deformation of the joint surface, the influence of friction, the influence of low stiffness parts, and the influence of clearance.


Errors caused by thermal deformation of the process system


The thermal deformation of the process system has a great influence on the machining error, especially in precision machining and large-scale machining, the machining error caused by thermal deformation can sometimes account for 50% of the total error of the workpiece.


Adjustment error


In each process of machining, it is always necessary to adjust the process system in one way or another. Since the adjustment cannot be absolutely accurate, an adjustment error occurs. In the process system, the mutual position accuracy of the workpiece and the tool on the machine tool is guaranteed by adjusting the machine tool, tool, fixture or workpiece. When the original accuracy of machine tools, tools, fixtures and workpiece blanks meets the process requirements without considering dynamic factors, the adjustment error plays a decisive role in the machining error.


Measurement error


When the parts are measured during or after processing, the measurement accuracy is directly affected by the measurement method, the accuracy of the measuring tool, the workpiece and the subjective and objective factors.


Internal stress


The stress that exists inside the part without external force is called internal stress. Once the internal stress is generated on the workpiece, the metal of the workpiece will be in a high-energy unstable state, and it will instinctively transform to a low-energy stable state, accompanied by deformation, so that the workpiece loses its original processing accuracy .

(1)







Hot Tags: vertical machining center for sale, China, suppliers, manufacturers, factory, price, for sale, made in China, Vertical Machining Center 850, Vertical Cnc, CNC Vertical Machining, Vertical Machining Center Manufacturers

Send Inquiry

whatsapp

skype

E-mail

Inquiry