CNC Machining Center V1270

CNC Machining Center V1270

X-axis travel mm 1200
Y axis travel mm 700
Z-axis travel mm 700
Send Inquiry
Product Introduction

Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of cnc machining center v1270 in China. If you're going to wholesale high quality cnc machining center v1270 made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

 

 

1270

Here are seven tips for machine tool positioning accuracy detection

 

 

The positioning accuracy of CNC machine tools refers to the position accuracy that each coordinate axis of CNC machining center V1270 can achieve under the control of CNC device. The positioning accuracy of CNC machine tools can also be understood as the motion accuracy of machine tools. Ordinary machine tools are fed manually, and the positioning accuracy is mainly determined by the reading error, while the movement of CNC machine tools is realized by digital program instructions, so the positioning accuracy is determined by the CNC system and mechanical transmission error. The movement of each moving part of the machine tool is completed under the control of the CNC device. The accuracy that each moving part can achieve under the control of program instructions directly reflects the accuracy that can be achieved by the machined parts. Therefore, positioning accuracy is a very important detection content.

1. Linear motion positioning accuracy detection Linear motion positioning accuracy is generally carried out under no-load conditions of machine tools and workbenches. According to national standards and the provisions of the International Organization for Standardization (ISO standards), the detection of CNC machine tools should be based on laser measurement. In the absence of a laser interferometer, for general users, a standard ruler can also be used with an optical reading microscope for comparative measurement. However, the accuracy of the measuring instrument must be 1~2 levels higher than the accuracy being measured. In order to reflect all errors in multiple positioning, the ISO standard stipulates that each positioning point shall be calculated based on the average value of five measurement data and the positioning point error band composed of the error-3 error band. 2. The instrument used for the detection of linear motion repeat positioning accuracy is the same as that used for the detection of positioning accuracy. The general detection method is to measure at any three positions close to the midpoint and both ends of each coordinate stroke, and each position is positioned by rapid movement. The positioning is repeated 7 times under the same conditions, the stop position value is measured, and the maximum difference in readings is calculated. One-half of the largest difference among the three positions, with positive and negative signs, is used as the repeat positioning accuracy of the coordinate. It is the most basic indicator reflecting the stability of axis motion accuracy. 3. Origin return accuracy detection of linear motion The origin return accuracy is essentially the repeat positioning accuracy of a special point on the coordinate axis, so its detection method is exactly the same as the repeat positioning accuracy. 4. Reverse error detection of linear motion The reverse error of linear motion, also called lost momentum, includes the reverse dead zone of the driving part (such as servo motor, servo hydraulic motor and stepper motor) on the feed transmission chain of the coordinate axis, the reverse clearance of each mechanical motion transmission pair, and the comprehensive reflection of the elastic deformation and other errors. The larger the error, the lower the positioning accuracy and repeat positioning accuracy. The detection method of the reverse error is to move a distance in the forward or reverse direction in advance within the stroke of the measured coordinate axis and use this stop position as the reference, then give a certain movement command value in the same direction to move a distance, and then move the same distance in the opposite direction to measure the difference between the stop position and the reference position. Perform multiple measurements (usually 7 times) at three positions near the midpoint and both ends of the stroke, and calculate the average value at each position. The maximum value of the average value is the reverse error value.
5. Positioning accuracy detection of rotary table The measuring tools include standard turntable, angle polyhedron, circular grating and collimator (collimator), etc., which can be selected according to specific circumstances. The measurement method is to make the workbench rotate forward (or reverse) by an angle and stop, lock, and position, use this position as a reference, and then quickly rotate the workbench in the same direction, lock and position every 30, and measure. The forward and reverse rotations are measured for one circle each, and the maximum value of the difference between the actual rotation angle of each positioning position and the theoretical value (command value) is the indexing error. If it is a CNC rotary table, every 30 should be a target position, and each target position should be quickly positioned 7 times in both the forward and reverse directions. The difference between the actual position and the target position is the position deviation, and then the average position deviation and standard deviation are calculated according to the method specified in GB10931-89 "Evaluation Method for Position Accuracy of Digital Control Machine Tools". The difference between the maximum value of all average position deviations and standard deviations and the minimum value of all average position deviations and standard deviations is the positioning accuracy error of the CNC rotary table. Considering the actual use requirements of dry-type transformers, generally, several right-angle points such as 0, 90, 180, and 270 are measured, and the accuracy of these points is required to be one level higher than that of other angle positions. 6. The repeatability indexing accuracy detection and measurement method of the rotary table is to select three positions within one week of the rotary table and repeat the positioning three times, and detect them in the positive and negative directions respectively. The maximum value of the difference between all readings and the theoretical value of the corresponding position is the indexing accuracy. If it is a CNC rotary table, take a measuring point every 30 as the target position, and quickly position each target position 5 times from the positive and negative directions respectively, measure the difference between the actual position and the target position, that is, the position deviation, and then calculate the standard deviation according to the method specified in GB10931-89. 6 times the maximum value of the standard deviation of each measuring point is the repeatability indexing accuracy of the CNC rotary table. 7. The origin return accuracy detection and measurement method of the rotary table is to perform an origin return from 7 arbitrary positions respectively, measure its stop position, and use the maximum difference read as the origin return accuracy. It should be pointed out that the existing positioning accuracy detection is measured under fast and positioning conditions. For some CNC machine tools with poor feed system style, different positioning accuracy values ​​will be obtained when different feed speeds are used for positioning. In addition, the positioning accuracy measurement results are related to the ambient temperature and the working state of the coordinate axis. At present, most CNC machine tools use a semi-closed loop system, and the position detection elements are mostly installed on the drive motor. It is not surprising that an error of 0.01~0.02mm is generated within a 1m stroke. This is an error caused by thermal elongation. Some machine tools use pre-stretching (pre-tightening) methods to reduce the impact.

The repeatability of each coordinate axis is the most basic accuracy indicator of the axis. It reflects the stability of the axis's motion accuracy. It cannot be assumed that a machine tool with poor accuracy can be used stably in production. At present, due to the increasing number of functions of CNC systems, the system errors of the motion accuracy of each ejector, such as the accumulated pitch error and the reverse clearance error, can be compensated by the system. Only the random error cannot be compensated, and the repeatability accuracy reflects the comprehensive random error of the feed drive mechanism. It cannot be corrected by the CNC system compensation. When it is found to be out of tolerance, only the feed transmission chain can be fine-tuned. Therefore, if it is allowed to select a machine tool, it is better to choose a machine tool with high repeatability accuracy.

 

Machine parameters 

 

 

Parameter

Unit

V-1270

●

TRAVEL

 

 

 

 

X-axis travel

mm

1200

 

Y axis travel

mm

700

 

Z-axis travel

mm

700

 

Spindle nose to work surface

mm

100-600

 

Spindle center to column guide

mm

750

●

work table

 

 

 

 

Table Dimensions (L x W)

mm

1300*700

 

T-slot (number-size*spacing)

mm

5*18X125

 

maximum load

Kg

1200

L

Spindle

 

 

 

 

Spindle speed

rpm

10000

 

Spindle motor power

kw

11/15

 

Spindle taper hole (model/installation size)

 

BT40(150)

●

feed

 

 

 

 

G00 rapid traverse (X axis)

m/min

24

 

G00 rapid traverse (Y axis)

m/min

24

 

G00 rapid traverse (Z axis)

m/min

20

●

machine precision

 

 

 

 

positioning accuracy

mm

0.0075/300

 

Repeatability

mm

0.005/300

●

other

 

 

 

 

Floor space (length)

mm

4100

 

(width)

mm

3100

 

Machine height (height)

mm

3200

 

machine weight

Kg

7000KGS

 

vacuum packaging

/

YES

 

Fixed wooden frame

/

YES

 

product-434-227product-453-236

 

 

 

Item

Brand

Origin

Controller

MITSUBISHI M80B

JAPAN

Spindle motor

11KW 57NM

JAPAN

X, Y, Z axis motors

X-axis motor 1FK7084-3BC71-1RG1

Y-axis motor 1FK7084-3BC71-1RG1

Z-axismotor 1FK7084-3BC71-1RG1/brake Z

HG303/HG303/HG303

JAPAN

handwheel

TOSUKO

Japan 5v

Tool magazine BT40-30T with bracket

SANJET/AIMACH

TAIWAN

Spindle BT40-150-10000 (belt type)

WAY LONG/Royal/KENTURN

TAIWAN

Spindle oil cooler Condensation 10A

RUCOL

China

Roller screw (X, Y, Z) 4012 C3 grade

Extended double nut HIWIN C3 class

TAIWAN

Linear rail (roller) XZ 45 roller RGH45 P grade

HIWIN/PMI

TAIWAN

Linear rail (roller) Y 45 roller RGH45 P grade 2 rails

HIWIN/PMI

Japan

Bearing 30TAC (3062) P4

NSK/FAG

domestic

Coupling MJC-65CS-EGR-24-35

DK

joint venture

Oiler Lubrication pump 3L with microcomputer

Baotn

domestic

Heat exchanger oil cooler 220V air cooling

SINAER

domestic

Cutting water motor 750W 220V/380V

SMC

Japan

Solenoid valve 24V/2 sets

SMC

Japan

Air filter 2 filter cups 6PAM

Schneider

France

AC contactor 220V

Schneider

France

Overload protector

Schneider

France

Relay

HEYI

joint venture

Machine tool work light (explosion-proof light)

BEIZHE

joint venture

Other main electrical components

HONGWANG

domestic

Shields (X, Y, Z)

 

Domestic special grade paint

 

The standard configuration

 

1>. MITSUBISHI M80B, Celeron panel wire 1 set

2>. Belt-type spindle BT40-10000 rpm 1 set

3>. Spindle oil cooler 1 set

4>. Rear flushing chip removal-front discharge outlet 1 set

5>. Automatic lubrication system 1 set

6>. Foundation screws and pads 10 sets

7>. Tool box 1 set

8>. Work lights (explosion-proof lights) 2 sets

9>. Warning lights 1 set

10>. Spindle air blowing device 1 set

11>. Fully enclosed protective cover 1 set

12>. Automatic power-off system 1 set

13>. Cooling water system 1 set

14>. Air gun 1 set

15>. Rigid tapping function standard configuration

16>. Electrical box heat exchanger 1 set

17>. "Program Manual", "Operation Manual"/U disk data 1 set

18: Export packaging: including wooden pallet + vacuum packaging + forklift loading

 

 

product-535-247

 

Taboos in high-speed machining of CNC machining center V1270 production 

 

High-speed cutting technology is an advanced technology. Its development and promotion and application have promoted technological progress and improved production efficiency in the manufacturing field. High-speed cutting technology refers to the technology of cutting parts at a cutting speed 5 to 10 times higher than traditional cutting. The types used mainly include high-speed soft cutting, high-speed hard cutting, high-speed dry cutting and high-feed cutting.

High-speed cutting has the following advantages:

1) The cutting speed is greatly improved, which greatly shortens the cutting time, the cutting efficiency can be increased by 3 to 5 times, and the processing cost can be reduced by 20% to 40%.

2) It effectively reduces the cutting force and cutting deformation, and is suitable for high-precision machining of thin-walled workpieces, shafts and other long-distance cutting.

3) The chips will take away a lot of cutting heat, and the thermal deformation of the workpiece is reduced, so it is suitable for the processing of heat-sensitive components.

4) The operating frequency of the cutting system is much higher than the low-order natural frequency of ordinary machine tools. Due to the reduction of vibration, the scale, built-up edge, work hardening and residual stress in the cutting process are also controlled, so the surface quality of the workpiece is significantly improved.

5) When high-speed cutting is used to process hardened workpieces with high hardness, it can replace grinding, shorten the production cycle and reduce production costs.

At present, high-speed cutting has been widely used in production, especially for traditional difficult-to-cut materials, such as nickel-based alloys, ferroalloys and reinforced fiber plastics. At present, the application scope of high-speed cutting is mainly turning and milling, and it is particularly suitable for processing non-ferrous metals and their alloys, nickel-based high-temperature alloys, ferroalloys, graphite and other materials, as well as molds, hardened molds, etc. Its application taboos are as follows.

 

 

 

 

Hot Tags: cnc machining center v1270, China, suppliers, manufacturers, factory, price, for sale, made in China, Best Vertical Machining Center, 5 Axis Cnc Machining Center

Send Inquiry

whatsapp

skype

E-mail

Inquiry