3D Milling Machine
Number of control servo axes axis 3 axis
Work table size mm 1000×600
Work table load kg 600
T-slot of worktable (number-size×spacing) mm 4-18×130
Left and right stroke (X) mm 800
Back and forth stroke (Y) mm 500
Up and down stroke (Z) mm 520
Spindle taper hole (specification/installation size) mm BT40
Spindle speed rpm 0-12000rpm 7.5/11kw
Spindle drive mode Direct
Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of 3d milling machine in China. If you're going to wholesale high quality 3d milling machine made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.
3d milling machine adopts a cross slide bed structure with super wide bottom seat, large-span herringbone column structure, the whole machine has enough
Strength, rigidity and stability.


The five major parts of this machine tool are the column, saddle, base,The spindle box and worktable are both double-layer box-shaped or nearly box-shaped
The structure is equipped with enough stiffeners and high-strength When cast iron (HT300) is cast and is subjected to secondary annealing stress Effective treatment to ensure that the whole machine has sufficient strength, rigidity and stability.

X, Y, Z axis adopt P-level linear roller guide produced by Taiwan HIWIN, Yintai (PMI) and Kate Company Rail, X and Y axis 6 sliders, C3 level double nut ball screw, low dynamic and static friction, high rigidity for heavy cutting, no crawling at low speed, High positioning accuracy.The ball screw support structure adopts high-quality (imported) large contact angle (60°) ball screw professional bearing support,
At the same time, the secondary end of the lead screw has a pre-tensioned structure to ensure that the supporting mechanism has sufficient rigidity and precision stability. The X, Y, and Z axes are driven by a 3KW servo motor, and the coupling is directly connected with the high-precision ball screw to reduce the intermediate ring Joints, to achieve a gapless transmission, flexible feeding, accurate positioning, high transmission accuracy, each machine tool is made of British Rennie The laser interferometer is used for lead screw error detection and compensation to ensure the best transmission accuracy.

The Z-axis servo motor has an automatic brake function. In the case of power failure, the automatic brake can hold the motor shaft tightly to make It cannot be rotated, which plays a role of safety protection.
| Spindle drive system : |
Spindle Cutting rigidity has been greatly improved, and each spindle has double-sided online dynamic balance correction, which can effectively suppress vibration and increase tool life And machining accuracy.
Tool magazine
The tool magazine adopts the BT40-24T disc-type tool magazine customized by Taiwan Shengjie, Desu or Jiafu, which is fast, reliable and stable.
It is equipped with functions such as nearby knife selection, cutting knife in advance, knife preparation, and large-diameter knife. The fully enclosed design of the knife chamber can effectively prevent chips enter.

| 3D milling machine parameters V850: |
Item | Unit | Specifications | |
System
| Operating system | set | MITSUBISHI M80B |
Number of control servo axes | axis | 3 axis | |
Worktable | Work table size | mm | 1000×600 |
Work table load | kg | 600 | |
T-slot of worktable (number-size×spacing) | mm | 4-18×130 | |
Travel | Left and right stroke (X) | mm | 800 |
Back and forth stroke (Y) | mm | 500 | |
Up and down stroke (Z) | mm | 520 | |
Spindle
| Spindle taper hole (specification/installation size) | mm | BT40 |
Spindle speed | rpm | 0-12000rpm | |
Spindle drive mode | Direct | ||
Distance from spindle center to column guide rail (suitable for vertical machines) | mm | 500 | |
Distance from spindle end surface to table surface | mm | 100-640 | |
Guideway | X/Y/Z axis roller screw specifications | 3616/3616/3616 | |
X-axis guide/line guide specification | Sliding roller linear guideway | ||
Y-axis guide/line guide specification | Sliding roller linear guideway | ||
Z-axis guide/line guide specification | Sliding roller linear guideway | ||
Moto | X.Y.Z motor connection mode | Direct | |
Spindle motor parameters (power) | kw | 7.5 | |
X.Y.Z axis motor parameters (power) | kw | 2、2、3 | |
Spindle cooler capacity (gear type/750) | 250 | ||
Processing cooling pump horsepower | w | 450W | |
Feed | X. Y. Z axis processing speed | m/min | 12、12、12 |
X.Y.Z axis rapid feedrate moving speed | m/min | 48、48、48 | |
Power supply/air pressure | Air source | kg/cm² | 6kg/cm² |
Power requirement | kva | 20KVA | |
Machine accuracy | positioning accuracy | mm | ±0.005/300 |
Repeatability | mm | ±0.005/300 | |
Machine specifications | Net weight of machine tool | T | 4.5T |
Floor area of machine tool (length*width*height) | mm | 2800*2500*2550 |
more size for choice

3D Milling machine can be installed with optional accessories :
chip conveyor
4 5 axis rotary table.

Hot Tags: 3D Milling Machine, China, suppliers, manufacturers, factory, price, for sale, made in China, cnc milling steel, cnc milling material, cnc milling shape, cnc milling stainless steel, cnc milling distribution, cnc milling craftsman
Next
Mini CNC MillYou Might Also Like
Send Inquiry














