VMC Vertical Machining Center

Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of vmc vertical machining center in China. If you're going to wholesale high quality vmc vertical machining center made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

Structural features of VMC Vertical Machining Center:

1. Casting

The castings of this machine tool are all made of resin sand, and have undergone two artificial aging treatments, with good stability, high strength, and stable and reliable accuracy.

2. Spindle

The spindle system selected for this machine tool is a complete set imported from Taiwan, and all important parts have been strengthened; the world-renowned manufacturer’s high-precision spindle special bearings and NBU15 grease lubrication are used. The balance correction and running-in test make the whole spindle longer service life and higher reliability.

The spindle motor of this machine tool is connected to the spindle pulley through a special high-speed arc toothed belt to complete the main drive system.

3. Unload the knife

This machine tool adopts the gas-liquid pressurized cylinder, a fast pneumatic tool unloading device commonly used in machining centers, to realize the rapid loading and unloading of tools.

4. Lead screw

The X, Y, and Z three-axis drive ball screws of this machine are all high-precision pre-tightened ball screws provided by Taiwan's professional supporting manufacturers. Both ends of the ball screws are equipped with imported P4 paired ball screws. Bearing. The coupling adopts well-known brand couplings, so that the transmission rigidity of the three-axis is strong, and the accuracy is stable and reliable.

5. Rails

The X, Y, and Z axes of this machine adopt roller guides from well-known Taiwanese manufacturers, which improves the machine's movement accuracy and speed.

6. Feed system

The feed system of this machine tool adopts a servo motor to drive the worktable, the sliding saddle and the spindle box through the elastic coupling and the ball screw to realize the feed in the three directions of X, Y, and Z.

7. Tool magazine

This machine tool is equipped with disc type BT40/24T.

8. Hanging console

The console adopts a hanging type, and the CRT box can also be rotated at an angle of 90°. The machine tool is also equipped with a draggable hand-operated pulse generator, which is more convenient to operate.

9. Full protection of the machine tool

The protection of this machine tool adopts the form of full protection. Prevent the leakage of coolant and keep the environment clean.

VMC vertical machining center Features 

Integral casting structure

Linear Guides

Bed base, bed body, bedside box, etc.

The main components are cast with high-strength materials

Made to ensure the long-term use of the machine

Quenched rail

Taiwan line rail/screw

Wear-resistant cast iron, audio quenching guide rail

Control System

Standard system: FANUC, Siemens, Mitsubishi,

Optional: SYNTEC/GSK and other operating systems

Options :

4 axis /5 axis rotary table TAN  "TJR"

Tool setter RENISHAW 

chip conveyor 

Details show 

high rigidity casting 

Structural features of VMC Vertical Machining Center:

1. Casting

The castings of this machine tool are all made of resin sand, and have undergone two artificial aging treatments, with good stability, high strength, and stable and reliable accuracy.

2. Spindle

The spindle system selected for this machine tool is a complete set imported from Taiwan, and all important parts have been strengthened; the world-renowned manufacturer’s high-precision spindle special bearings and NBU15 grease lubrication are used. The balance correction and running-in test make the whole spindle longer service life and higher reliability.

The spindle motor of this machine tool is connected to the spindle pulley through a special high-speed arc toothed belt to complete the main drive system.

3. Unload the knife

This machine tool adopts the gas-liquid pressurized cylinder, a fast pneumatic tool unloading device commonly used in machining centers, to realize the rapid loading and unloading of tools.

4. Lead screw

The X, Y, and Z three-axis drive ball screws of this machine are all high-precision pre-tightened ball screws provided by Taiwan's professional supporting manufacturers. Both ends of the ball screws are equipped with imported P4 paired ball screws. Bearing. The coupling adopts well-known brand couplings, so that the transmission rigidity of the three-axis is strong, and the accuracy is stable and reliable.

5. Rails

The X, Y, and Z axes of this machine adopt roller guides from well-known Taiwanese manufacturers, which improves the machine's movement accuracy and speed.

6. Feed system

The feed system of this VMC Vertical Machining Center adopts a servo motor to drive the worktable, the sliding saddle and the spindle box through the elastic coupling and the ball screw to realize the feed in the three directions of X, Y, and Z.

7. Tool magazine

This machine tool is equipped with disc type BT40/24T.

8. Full protection of the machine tool

The protection of this machine tool adopts the form of full protection. Prevent the leakage of coolant and keep the environment clean.

Hot Tags: vmc vertical machining center, China, suppliers, manufacturers, factory, price, for sale, made in China, Vertical Machining Center 850, Vertical Cnc, Vertical Machining Center Manufacturers, CNC Vertical Machining