About the maintenance items of machining centre cnc:
After the workpiece is clamped once on the machining centre cnc, the digital control system can control the machine tool to automatically select and replace tools according to different procedures, automatically change the spindle speed, feed, and the motion track of the tool relative to the workpiece and other auxiliary functions, in turn End multi-process processing on several surfaces of the workpiece. And there are a variety of tool change or tool selection functions, and then greatly increase the output power.
The CNC machining center reduces the time of workpiece clamping, measurement and machine tool adjustment due to the concentration of processes and automatic tool change, so that the cutting time of the machine tool reaches about 80% of the machine start time, compared to 15-20% for ordinary machine tools; together It also reduces the work piece turnover, handling and storage time between processes, shortens the production cycle, and has obvious economic effects. The CNC machining center is suitable for small and medium batch production with complicated parts, high precision requirements, and repeated product replacements.
Timely maintenance items of CNC machining center:
1. Check the condition of the lubrication system and pressure gauge, clean the filter screen of the lubrication system, replace the lubricating oil, and dredge the oil circuit,
2. Check the air system, clean the air filter, and eliminate the leakage of pressure gas.
3. Check the fluid system, clean the filter, clean the oil tank, replace or filter the oil. If permitted, replace the seal.
4. Tighten all transmission parts and replace bad standard parts.
5. For grease lubrication parts, add grease as required
6. Clean and clean each transmission surface,
7. Check the condition of the tool magazine and the manipulator, analyze the wear and tear of the manipulator, and propose replacement suggestions to the customer.
8. Correct the damaged parts of external components.
9. Check the condition of the protective cover. Accurately feedback information to customers.
