Speaking of vertical CNC machining center v1165, everyone should be very familiar with it. Its position in the market is increasing day by day, and more and more companies have begun to purchase processing centers in large quantities. Many businesses attach great importance to the performance of high-speed machining centers. If you want to choose the best machining center, you must choose a suitable tool change method.
The value of the tool magazine
The tool magazine is the positioning axis of the system, and its status is relatively high. The processing performance is closely related to the tool magazine. The capacity of the tool magazine and the operating speed are the biggest factors affecting the processing efficiency. Its performance is relatively complete. Generally, any external factors will not have any impact on it. This is also the case for small machining centers no matter what the environment. The main reason for higher processing technology can be used. If you choose a tool magazine with better quality and stronger driving capability, the accurate positioning of the movement speed and the accurate adjustment of the rotation position during processing are very accurate.
When installing the tool, the tool number must correspond to the tool sleeve
The performance selection of the tool is particularly important, but when selecting and installing the tool, you must pay attention to the correspondence between the tool number and the tool sleeve. The number of each tool is fixed. When the tool is replaced, the tool number will also change randomly. Before selecting and installing, it is necessary to fully compare the tool number and the information of the tool holder. If this link is not done very well, no matter how strong the performance of the tool is, the effect will not be very obvious during processing.
Different tools have some differences in tool change methods
For different tools, the tool change method will be very different. If it is to change a large-diameter tool, it needs to be replaced according to a fixed tool change method when replacing it. If the tool used has a small diameter, it is relatively easy to change it, and it can be changed randomly.
Through the above description, I believe that everyone should have a full understanding of the tool. The cutting tool is the most important part of the machining center. The above skills must be used when selecting and installing. I believe that after you master the above skills, the working efficiency of the machining center will definitely be higher.
