Cylindrical milling cutter
It is used for processing planes on horizontal milling machines. The cutter teeth are distributed on the circumference of the milling cutter. According to the tooth shape, they are divided into straight teeth and spiral teeth. According to the number of teeth, there are two types: coarse teeth and fine teeth. The helical coarse-tooth milling cutter has a small number of teeth, high tooth strength and large chip holding space, which is suitable for rough machining; fine-tooth milling cutters are suitable for fine machining.
Face milling cutter
Also known as disc milling cutter, it is used to process plane on vertical milling machine, face milling machine or gantry milling machine. There are cutter teeth on the end face and circumference, and there are also coarse and fine teeth. Its structure has three types: integral type, insert type and indexable type.
End mill
It is used for processing grooves and step surfaces, etc. The cutter teeth are on the circumference and end surface, and cannot be fed along the axial direction when working. When the end mill has end teeth passing through the center, it can feed axially.
Face milling cutter
It is used for processing various grooves and stepped surfaces, and there are cutter teeth on both sides and circumference.
Angle milling cutter
It is used for milling grooves at a certain angle, and there are two kinds of single-angle and double-angle milling cutters.
Saw blade cutter
It is used to process deep grooves and cut off workpieces, with more teeth on the circumference. In order to reduce friction during milling, there are 15'~1° secondary deflection angles on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail milling cutters, T-slot milling cutters and various forming milling cutters.
T-shaped milling cutter
Used to mill T-slots.
