Mar 26, 2021 Leave a message

End mill face sharpening technology


Before sharpening, the grinding wheel needs to be inspected. If the grinding wheel jumps, the cylindrical surface is irregular, the rounded corner is too large, etc., it needs to be trimmed. Generally, a grinding wheel modifier (diamond dresser, gear dresser, etc.) can be used to dress the cylindrical surface of the grinding wheel, or a waste grinding wheel with relatively large abrasive grain hardness can be used for dressing. If the side plane of the grinding wheel is already uneven, the grinding wheel can be replaced.


The technology of flattening the end face of an end mill. Regardless of the number of edges of an end mill, the end face of the blade must first be ground perpendicular to the axis. This is the key to ensuring that the highest point of the blade can be in the same plane. There are the following methods for correcting the perpendicularity of the end face of the blade relative to the axis of the milling cutter.


① Visual inspection. With the help of a flat plate, put the edge of the end mill on the flat plate and observe the left and right inclination angle. Then rotate the milling cutter 180° and observe its left and right tilt angle. If the inclination angles observed twice in the same direction are different, grinding is required until the inclination angles observed twice in the same direction are the same. Then rotate the milling cutter 90° and repeat the above action.


② Correct with a square ruler. Calibrate with a 90° square on a flat plate, place both the milling cutter and the square, and observe whether there is a gap between the milling cutter and the square or whether the gap is uniform, so that the verticality of the milling cutter can be judged.


② Correct with a square ruler. Calibrate with a 90° square on a flat plate, place both the milling cutter and the square, and observe whether there is a gap between the milling cutter and the square or whether the gap is uniform, so that the verticality of the milling cutter can be judged.




Send Inquiry

whatsapp

skype

E-mail

Inquiry