Sep 15, 2025 Leave a message

Four ways to strengthen metal materials

 

Definition

After a material yields, the phenomenon in which its strength and hardness increase while its plasticity and toughness decrease as the degree of deformation increases is called deformation hardening or work hardening.

02

Mechanism

As plastic deformation progresses, the dislocation density increases, causing more intricate interactions between dislocations during movement. This results in the formation of fixed steps and dislocation tangles, which increase the resistance to dislocation movement, increasing the deformation resistance and making further plastic deformation difficult, thereby increasing the strength of the metal.

Physical pattern: As the degree of deformation increases, the material's strength and hardness increase, while its plasticity and toughness decrease. The dislocation density continues to increase. According to the formula and figure, the strength is proportional to the square of the dislocation density ρ. The larger the Burgers vector b of the dislocations, the more significant the strengthening effect.

03

Methods

Cold deformation, such as cold pressing, rolling, and shot peening.

04

Example

Cold drawing steel wire can increase its strength exponentially.

05

The practical significance of deformation strengthening (advantages and disadvantages)

(1) Advantages:

① Deformation strengthening is an effective method to strengthen metals. For some materials that cannot be strengthened by heat treatment, deformation strengthening can be used to increase the strength of the material, which can increase the strength exponentially.

② It is an important factor in the processing and forming of certain workpieces or semi-finished products. It makes the metal deform evenly, making the forming of workpieces or semi-finished products possible, such as cold-drawn steel wire and stamping of parts.

③ Deformation strengthening can also improve the safety of parts or components during use. When stress concentration or overload occurs in certain parts of the parts, plastic deformation occurs at that part. Due to work hardening, the deformation of the overloaded part stops, thereby improving safety.

(2) Disadvantages:

① Deformation strengthening also brings troubles to the production and use of materials. Deformation increases strength and reduces plasticity, making it difficult to continue deformation and requiring more power consumption.

② In order to allow the material to continue to deform, recrystallization annealing is required in the middle so that the material can continue to deform without cracking, which increases production costs.

Picture
Picture

II. Solid solution strengthening

Picture
01

Definition

The phenomenon that the strength and hardness of the solid solution increase while the plasticity and toughness decrease with the increase of the solute atom content is called solid solution strengthening.

02

Mechanism

(1) The dissolution of solute atoms distorts the lattice of the solid solution, which has an obstructive effect on the movement of dislocations on the slip plane.

(2) The Coriolis gas formed by the solute atoms segregated on the dislocation line pins the dislocation and increases the resistance to dislocation movement.

(3) The segregation of solute atoms in the stacking fault region hinders the movement of extended dislocations. All factors that hinder dislocation movement and increase the resistance to dislocation movement can increase strength.

03

Law

①Within the solid solution solubility range, the greater the mass fraction of the alloying element, the greater the strengthening effect

②The greater the size difference between the solute atoms and the solvent atoms, the more significant the strengthening effect.

③ The strengthening effect of solute elements that form interstitial solid solutions is greater than that of elements that form substitutional solid solutions.

④ The greater the difference in the number of valence electrons between solute and solvent atoms, the greater the strengthening effect.

04

Methods

Alloying, i.e., the addition of alloying elements.

05

Example

The strength of copper-nickel alloys is greater than that of pure copper and nickel.

Image
Image

III. Grain Refinement Strengthening

Image
01

Definition

Grain refinement strengthening is the phenomenon in which the strength and hardness of a material increase, while its plasticity and toughness also improve as the grain size decreases.

02

Mechanism

The principle behind this effect is the retardation of dislocation slip by grain boundaries. In polycrystalline materials, dislocation movement must overcome the resistance of grain boundaries. This is because the dislocations on either side of a grain boundary have different orientations. Therefore, in a given grain, a slipping dislocation cannot directly cross the grain boundary into an adjacent grain. Only when a large number of dislocations accumulate at the grain boundary, causing stress concentration, can the movement of existing dislocations in adjacent grains be stimulated to cause slip. Therefore, the finer the grains, the higher the material's strength.

03

Rule

The finer the grains, the larger the grain boundary area. According to the Hall-Page equation, the smaller the average grain diameter d, the higher the material's yield strength σs.

04

Methods of Grain Refinement

① During the crystallization process, grain refinement can be achieved by increasing the degree of undercooling, performing modification, vibrating, and stirring to increase the nucleation rate.

② For cold-deformed metals, grain refinement can be achieved by controlling the degree of deformation and annealing temperature.

③ Grain refinement can be achieved through heat treatments such as normalizing and annealing.

④ Alloying elements can be added to steel to form new phases, thereby inhibiting grain growth.

Image
Image

IV. Second Phase Strengthening

Image
01

Definition

The presence of one or more additional phases within the metal matrix enhances the metal's strength. Depending on the process used to obtain the second phase, second phase strengthening can be categorized as follows: ① Precipitation strengthening: obtaining the second phase through phase transformation heat treatment. ② Dispersion strengthening: obtaining the second phase through powder sintering or internal oxidation.

02

Mechanism

During dislocation motion, dislocations encounter a secondary phase and must bypass or cut through it. This secondary phase hinders dislocation motion, increasing the material's strength.

03

Example

The presence of cementite in steel increases its strength.

Send Inquiry

whatsapp

skype

E-mail

Inquiry