Jun 23, 2021 Leave a message

Heavy cnc machining centres



Heavy-duty cnc machining centres (with outstanding operational rigidity and stability) industry general practice: increase the stroke of the small machine tool as much as possible to increase the processing size of the machine tool (low cost/large machine tool); our approach: The configuration minimizes the stroke to increase the machining rigidity of the machine tool (high cost/small machine tool). Product introduction: suitable materials: castings, steel parts, stainless steel parts. Suitable features: large holes, large teeth, large grooves, mass production and processing of medium-sized hardware parts, which can be drilled, tapped, and milled. The cnc machining centres adopt the mature and stable CNC machining center system currently on the market, and are equipped with 24 BT40 robotic arm tool magazines in Taiwan. The product configuration is high, the accuracy is high, and the stability is high. It can cut larger products. 1. The large span structure design adopts roller linear guides to increase the rigidity of the equipment; 2. The design of the tool magazine side hanging on the side of the column is changed to be supported by the base to reduce the lateral force of the tool magazine on the column; 3 .Adopt 24 BT40 mechanical arm tool magazine and 150 large diameter BT40 mechanical spindle, which has larger cutting force; 4. The core components are all made in Taiwan, FANUC system, Taiwan KERTURN spindle, Taiwan Shangyin guide rail, Taiwan SANJET tool magazine, etc.; 5. Adopt the absolute value servo feed drive motor, without the traditional design of the stroke block, reducing the common over-travel alarm; 6. The equipment can have outstanding operating rigidity and stability characteristics. 7. The Z-axis guide rail is 45mm and the screw is 40mm. The screw and guide rail of the gantry machine tool and 1580 large-scale machining center are used, which greatly improves the rigidity. (The industry is generally 30mm) 8. The spindle box is a double-layer shin, and the spindle box has a box body and an ellipsoid, which greatly improves the rigidity. (The industry generally has a single shin bar) 9. The Z-axis motor seat and the column are integrally cast, and there will be no looseness. (The industry generally has a separate motor base fixed on the column with screws)



Send Inquiry

whatsapp

skype

E-mail

Inquiry