How to find the center of the machining center to the tool:
1. Seeing that the lever wire watch rotates once but the pointer basically does not move or is within the allowable range of error, it indicates that the center of the spindle and the center of the workpiece are concentric.
2. If the programming origin of the workpiece happens to be the center point, you can cut into the coordinate system input interface and move the cursor to the X input column.
3. Enter X0, and then press the measurement button at the bottom of the screen. Then the Y axis can be performed in the same way.
4. If you are not at ease, you can use the OFFSET key to switch to the coordinate system interface to check whether the machine coordinate system and the G54 series workpiece coordinate system are wrong. If the correct value should be exactly the same.
