Overview of cnc processing technology
The first section cnc main processing objects
The second section cnc machining workpiece installation
The third section cnc machining tool exchange
Section 4 Development of CNC Processing Technology
Selection and determination of cnc processing content
cnc processing technology analysis
cnc machining process segmentation
cnc processing selection path
Determination of CNC machining process parameters
The main processing objects of the cnc system
Milling is one of the most commonly used processing methods in mechanical processing. Mainly used for face milling and contour milling, as well as drilling, extending, reaming, boring and tapping of parts. Parts suitable for CNC include:
(1) Plane parts
The characteristic of plane parts is that each machined surface can be flat or flat. At present, most of the parts processed on CNC milling machines are plane parts. Flattened parts are the simplest type of CNC machining objects, and can usually be processed by two-axis simultaneous machining (ie, two-axis semi-coordinate machining) on a three-axis CNC milling machine.
Plane parts with plane contours Plane parts with slopes Plane parts with positive plane parts and ribbed plane parts
(2) Variable tilt parts
Parts whose angles between the machined surface and the horizontal plane are constantly changing are called variable-angle parts. When machining variable tilt parts, it is best to use a four-axis or five-axis CNC milling machine for angle processing. If there is no such machine tool, 2-axis semi-control line machining can produce approximate values on a 3-axis CNC milling machine, but the accuracy is slightly lower.
(3) Surface (3D) parts
Parts whose machining surface is a space surface are called curved parts. The curved surface part and the machined surface of the milling cutter are always in point contact. It is usually processed by a three-axis CNC milling machine, and there are two commonly used processing methods:
The processing adopts 2-axis semi-linked wire cutting method. In the tangent method, only two coordinates are connected during processing, and the other coordinates are periodically performed with a certain line spacing. This method is usually used to deal with less complex spatial surfaces.
b. Three-axis linkage processing. The milling machine used must have the X, Y, and z three-axis linkage processing function in order to perform spatial linear interpolation. This method is usually used to deal with more complex spatial surfaces, such as engines or molds.
The second section cnc machining workpiece installation
1. The principles that should be followed in the selection of cnc processing positioning datum
(1) In the parts, choose the design standard as the position standard as much as possible
Choosing the design datum as the position of the positioning datum can prevent positioning errors caused by datum mismatch, ensure processing accuracy, and simplify programming. When making a processing plan for a part, first select the best finishing conditions according to the principle of meeting the conditions to specify the processing path of the part. Therefore, during the initial processing, the surface to be processed must be regarded as a rough standard.
(2) When the positioning datum of the part does not match the design datum, and the processing surface and the design datum are not processed at the same time in one installation, the drawing of the part must be carefully analyzed to determine the design function of the part design datum. Through the calculation of the dimensional chain, the tolerance range between the positioning datum and the design datum is strictly specified to ensure the machining accuracy.
(3) If the CNC milling machine cannot complete the entire surface processing including the design datum at the same time, it should be considered that the selected datum can be used for positioning, and then all the main precision parts can be processed at one time.
) The selection of positioning standards should ensure the completion of as much processing content as possible. To this end, we must consider the positioning methods that can be processed on a single surface. For non-rotating parts, it is best to use one and two hole positioning schemes so that the tool can machine another surface. If the workpiece does not have suitable holes, you can add and place machined holes.
(5) During batch processing, the part position reference should match the workpiece coordinate system as much as possible and the tool reference (the size value between the origin of the workpiece coordinate system and the position reference after processing).
In the batch process, the fixture is used to locate and install the workpiece. The tool sets up one workpiece coordinate system at a time, and then processes a series of workpieces. If the tool reference of the workpiece coordinate system matches the part positioning reference, the positioning reference is directly transferred, thereby reducing the positioning error.
(6) If multiple installations are required, the principles of unified standards must be observed.
The third section cnc machining tool exchange
Decision on knife point and knife point
For CNC machine tools, it is very important to determine the relative position of the tool and the workpiece at the beginning of processing. This is performed for the tool point "to the tool point" refers to the reference point for determining the position of the tool relative to the workpiece through the tool setting. During programming, whether the tool actually moves relative to the workpiece or the workpiece moves relative to the tool, the workpiece is considered to be stationary and the tool is also moving. The tool point is also the birthplace of part processing
The selection principle of the knife point is as follows:
(1) Facilitate mathematical processing and simplify programming.
(2) It is easy to find the position to determine the origin of parts processing on the machine tool;
(3) It is convenient to check during processing.
(4) The processing error caused is small.
You can set an example of a tool point on a part, fixture, or machine tool, but it must have a known and precise relationship with the part's position reference. If the accuracy of the tool is required to be high, the tool point should be selected as much as possible in the design or technical basis of the part. For parts placed as holes, the center of the hole can be used as a pair of tool points
If facing the tool, the tool point must match the position of the tool. The tool position is the reference point for determining the tool position. For example, if the machining position of the flat milling cutter is the center of the normal plane. The turning tool of the ball end mill is the center of the ball. The drill bit is the tip of the drill bit.
The replacement point must be configured in accordance with the process content, and the principles of workpieces, fixtures, and machine tools are not observed when changing tools. The tool point is always a fixed point, located far away from the workpiece.
2. Tool setting method
Since the accuracy of the tool directly affects the machining accuracy, the movement of the tool must be cautious, and the tool method must meet the requirements of the machining accuracy of the parts.
If the machining accuracy of the part is high, you can use the dial indicator to find the correct tool path. The position of the tool is consistent with the tool point. However, this method is not efficient.
At present, some factories have adopted new methods such as optics and electronic instruments in order to reduce working hours and improve accuracy.
The usual tool setting method is as follows
(1) The origin (tool point) of the workpiece coordinate system is the center line of the cylindrical hole (or cylindrical surface)
a. Rod dial indicator (or dial indicator) tool
This working method is cumbersome and low in efficiency, but the tool accuracy is high, and the accuracy requirements of the tested hole are also high. Do not only use hinges or boring holes or rough-machined holes.
b. Use the edge search knife
The method is simple and intuitive to operate, and the tool precision is high, but the measuring hole requires high precision.
(2) The origin of the workpiece coordinate system (at the tool point) is the intersection of two orthogonal lines
a. How to use touch sensing (or test cutting)
The operation method is relatively simple, but there are traces on the surface of the workpiece, and the accuracy of the sword is low. A ratio must be added between the tool and the workpiece to subtract the thickness of the tool so as not to damage the surface of the workpiece. In this way, the matching knife of the standard mandrel and sealing gauge can also be used.
This step is similar to the tool that matches the tool, except for the radius of the tool that moves to the contact point of the viewfinder. The method is simple and the blade precision is high.
(3) Tool z direction tool
The tool data in the z direction of the tool is determined by the trim length of the tool on the tool holder and the zero position of the workpiece coordinate system in the z direction, and is located at the zero position of the workpiece coordinate system.
You can use the tool to directly contact the tool, or you can use the z-direction settings manager to create an accurate tool. It works in the same way as "find edges". The tool is also used to make the end of the tool contact the surface of the workpiece or the side surface of the z-direction setter, and use the machine coordinate display to determine the value of the tool. When using the z-direction setting manager to fit the tool, please consider the height of the z-direction setting device.
In addition, if different tools are used as tools when machining the workpiece, the distance from each tool to the zero point of the z coordinate is also different. Since the difference in these distances is the tool length compensation value, the machine tool or special tool must be used to measure the length of each tool (such as the pre-adjustment of the tool) and record it in the tool schedule for use by the machine tool worker. Section 4 Development of CNC Processing Technology
Because CNC machining has unique characteristics and application objects, in order to make full use of the advantages and important functions of CNC milling machines, the type of CNC milling machine, CNC machining objects and process content must be correctly selected. The following blanks are usually used as the main selection objects for CNC machining
(1) The contour of the curve in the workpiece, especially the contour of a non-circular curve or a list curve specified by a mathematical formula
(2) The space surface of the mathematical model is given.
(3) Testing of complex shapes, various sizes, markings and difficult parts
(4) When machining with a general-purpose milling machine, it is difficult to observe, measure and control the feed inner and outer grooves
(5) High-precision hole or surface adjusted to size
(Zhongshun can be installed with simple milling surface or shape separately
(7) Use CNC to improve production efficiency and greatly reduce the general processing content of physical labor intensity.
Vertical CNC milling machines and vertical machining centers are also suitable for processing boxes, covers, planar cams, templates, complex-shaped planar or three-dimensional parts, and the inside and outside of molds. Horizontal CNC milling machines and horizontal machining centers are suitable for processing complex box parts, pump bodies, car bodies, shells, etc. The multi-coordinate linkage horizontal machining center can also be used to process various complex curves, curved surfaces, impellers, molds, etc.
cnc processing technology analysis
(a) Part mode analysis
1. Verify the completeness and accuracy of the parts drawing
The processing program is written with the correct coordinate points
(1) The relationship between geometric elements (tangent, intersection, perpendicular, parallel, concentric, etc.) must be clear.
(2) Various geometric conditions must be sufficient, and there are no redundant dimensions that cause contradictions and closed dimensions that affect the process configuration.
2. Confirmation of the mathematical model of automatic programming components
After establishing a mathematical model of a complex curved surface, it is necessary to carefully study the integrity, rationality, and the logic of the geometric topological relationship of the mathematical model.
Completeness-indicates whether the overall intention of the designer is expressed.
Rationality—indicate whether the surface of the created mathematical model meets the requirements of surface modeling.
Topological relationship logic-can be used to create a reasonable tool movement path, such as whether the relationship between the surface and the surface (for example, position continuity, tangent continuity, curvature continuity, etc.) meets the specified requirements, and whether the surface trim is clean and complete Etc., the initial teacher can use the correct mathematical model. Therefore, the mathematical model required for NC programming must meet the following requirements
(1) The mathematical model is a complete geometric model, and the curved surface cannot be repeated or missing.
(2) There is no diversity in mathematical models, and there is no superficial overlap.
(3) The mathematical model must be a smooth geometric model.
(4) The mathematical model of the outer surface must be smooth to remove the fine defects inside the curved surface
(5) The curved surface parameter curve distribution in the mathematical model is reasonable, and the curved surface has no abnormal bumps or depressions.
(6) Process analysis and treatment of component structure;
1. The size of the part drawing should be easy to program.
In actual production, the drawing size of the part has a great influence on the process, so different requirements should be put forward for the part design and drawing.
2. Analyze the deformation of the parts to ensure the necessary machining accuracy
The cutting force generated by the thin substrate and ribs during processing and the elastic retreat of the thin plate make the vibration of the processing surface very large, so it is difficult to ensure the thickness and dimensional tolerance of the thin plate, and the surface roughness increases. In CNC machining, the deformation of parts not only affects the processing quality, but also cannot continue processing when the deformation is large.
Precaution:
(1) Improve the clamping method for wide sheet parts, and use appropriate processing steps and tools.
(2) Use appropriate heat treatment methods: quenching and tempering of steel parts, annealing of aluminum castings
(3) In order to reduce or eliminate the deformation effect, rough machining separation and symmetry removal.
3. Try to unify the relevant dimensions of the arc in the shape of the part
(1) Within the contour, the arc radius r always limits the diameter of the tool.
In the parts, the numerical consistency of the concave arc radius is very important to the process performance of CNC. In order to reduce the number of tool changes, it is best to use a uniform geometric type and size for the shape and groove of the part.
Generally speaking, even if complete uniformity is not required, the arc radii with similar values must be grouped to achieve partial uniformity, minimize the specifications of end mills and the number of tool changes, and prevent frequent tool changes from causing parts to be processed. The number of shipments increased and the surface quality decreased.
(2) The influence of the converted arc radius value
The radius of the conversion arc is larger, and the use of larger fingers for finishing milling cutters can improve efficiency, improve the quality of the machined surface, and thus improve process efficiency.
The larger the fillet radius of the groove bottom of the milling surface or the intersection of the bottom plate and the rib, the worse the function of the milling tool and the lower the efficiency. When r reaches a certain level, it must be processed with a ball end mill.
If the milled bottom surface area is large and the bottom arc r is also large, only two end mill parts with different r can be cut.
4. Ensure the uniform principle of standards
Although some parts must be reinstalled during the machining process, because CNC cannot pick up the tool, the tool often does not touch when reinstalling the part. In this case, it is best to use a unified reference position, so the part must contain appropriate holes as reference holes. If the part does not have a datum hole, you can also set the processing hole as a datum, especially a datum.
(c) Process analysis of part blank
1. The blank should have sufficient and stable machining allowance.
Blanks mainly refer to forgings and castings. Forging During the forging process, due to the absence of pressure and tolerance coefficients, the margin may be uneven. The error of the sand in the casting, the amount of shrinkage and the difference in the fluidity of the metal liquid cannot satisfy the hollowness, and the residual amount is uneven. In addition, the difference between blank deformation and deformation deformation may cause the remaining processing volume to be inappropriate and unstable.
Therefore, it must be fully considered when designing the unprocessed surface represented by the part array with a suitable margin.
2. Analysis of the applicability of blank clips
Mainly consider the position of the blank on the processing surface. For blanks without editing, it is recommended to add the remaining amount of editing or auxiliary standards (such as streaming plan or streaming plan) to the blank.
3. Analysis of blank deformation, margin size and uniformity
Analyze the degree of deformation during and after blank processing, and consider whether preventive measures and improvement measures are needed. In hot rolling, thick plates are easily deformed after quenching and aging, and quenched plates that have been stretched are preferred.
Regarding the size and uniformity of the blank margin, the main consideration is whether to perform slicing milling and whether to perform slicing milling during processing. This problem is particularly important in automatic programming.
Split processing flow
In the CNC machine tool, the process of machining parts in the machining center is particularly concentrated, and many parts only need to install the card to complete all the processes. However, the rough machining of parts, especially the processing of the reference plane and positioning surface of the raw material parts, must be completed on a normal machine tool and installed on a CNC machine tool for processing. This can give play to the characteristics of CNC machine tools, maintain the accuracy of CNC machine tools, extend the life of CNC machine tools, and reduce the cost of using CNC machine tools. The method of machining parts with Cnc machine tools is as follows
1. Sorting method of tool group
A tool that uses the same knife to machine all possible parts of a part, and uses the second knife and the third knife to divide the other parts. This method of division sequence can reduce the number of tool changes, reduce empty time, and reduce unnecessary positioning errors. 2. Roughness, finishing sorting method
This sorting method is sorted according to rough machining and finishing classification principles (such as part shape, dimensional accuracy, etc.). Rough machining, semi-finishing and finishing parts or placement of parts. During rough machining, I hope to distinguish the reliability and convenience of the layout and fixtures at any time, and process more surfaces through one installation. For blanks without editing, it is recommended to add the remaining amount of editing or auxiliary standards (such as streaming plan or streaming plan) to the blank. 3. Analysis of blank deformation, margin size and uniformity
Select path path
The tool path is the movement path and direction of the tool during NC machining. The tool path is closely related to the machining accuracy and surface quality of the part, so it is very important. The general principles for determining the path include:
(1) Ensure the machining accuracy and surface roughness of the parts.
(2) Numerical calculation is easy, and programming is less troublesome.
(3) Reduce the channel path, reduce the lead time and other auxiliary time.
(4) Try to reduce the number of blocks.
In addition, when choosing a path, please pay attention to the following points:
Determination of CNC machining process parameters
Determining process parameters is important in process development, and the use of automatic programming is more important than the success of the program.
(a) When machining curved surfaces with a ball end mill, determine the process parameters related to cutting accuracy
1. The step size is determined l (step)
Step length l (step) ——The distance between each two tool addresses determines the number of processing address data.
How to determine the step length of the curve trajectory l:
Directly define the step length method: by directly providing the value of the step length during programming, it is determined by the machining accuracy of the part
Indirectly define the step size method: define the approximate error indirectly define the step size
2. Determine the approximate error er
Approximate error er-the maximum allowable tolerance of the actual cutting trajectory deviating from the theoretical trajectory
Three methods of defining approximate errors (see Figure 16-4):
Specify external approximate error value: Use the remaining material on the surface of the part as the error value
(If accuracy is required, 0.0015~0.03mm is usually selected) Specify the internal approximate error value. Indicates the allowable amount of surface overcut inspection
Also specify internal and external approximation errors
3. Determine the line spacing s (cutting spacing)
Line spacing s (cutting spacing)-the distance between the machining path and two adjacent tool paths.
Impact: small line spacing: high processing accuracy, but long processing time and high cost
Large row spacing: processing





