In fact, stamping is not as dangerous as imagined. Whenever there is a stamping injury, there are reasons. On the one hand, it is due to factory management, and on the other hand, it is due to worker operation. As long as these two aspects are done well, stamping is still very safe. Today, through our more than ten years of stamping experience, we will analyze how to eliminate the danger of stamping.
1. Matters that factories should pay attention to
In fact, stamping can be viewed in the same way as logistics. The boss provides a car for the driver to drive, and at least provides the driver with a completely qualified car. The same is true for stamping. If workers are asked to operate the punch press, if even the punch press cannot be guaranteed to be completely qualified, how can safety be discussed? There are mainly the following requirements for equipment:
1. The punch press operates well
A good punch press is the foundation of safe production. The lubrication of the punch press must be normal; the copper tile cannot be excessively worn; the tightness of the brake must be within the normal range; the clutch and control system are flexible to operate; the bolts in various parts cannot be loose.
2. Install the safety grating
After installing the safety grating, if the puncher's hand or other items that affect safety enter the dangerous area, the punch press will stop urgently; in the stopped state, the punch press cannot be started.3. Reasonable switch design
It is necessary to design two start switches and one emergency stop switch, and these two start switches must also be a certain distance apart. The machine can only be started when the puncher presses the two start switches at the same time; the emergency stop switch cannot be too far away from the puncher, otherwise when something happens, the worker cannot stop the punch press immediately.
4. Reasonable design of stamping die
If the punch press is the first element of safe production, then the stamping die is the second element. The production of stamping parts depends on the stamping die, so whether the stamping die design is reasonable plays a vital role in safety.
Whether the material discharge is convenient and whether the material return is smooth affects the safety of the factory during operation. When designing the mold, it must be ensured that the factory can easily use tools to discharge and unload materials.
5. Safety tools must be used
During the stamping process, it is absolutely not allowed to let your hands enter the working area of the mold. This requires that safety tools must be used to complete the work of unloading and unloading. The safety tools commonly used now are magnets, suction cups and tweezers.
6. Reasonable noise reduction measures
Under the influence of the noise of the punching machine for a long time, the concentration and mental state of the workers will continue to decline. Reasonable noise reduction measures can not only ensure the mental state of the punching workers, but also be responsible for the health of the workers!
7. Establish a safety management system and a punching machine operation manual
The stamping factory must conduct safety training for the punching workers from time to time to make the concept of safe production deeply rooted in the hearts of the people. Help the punching workers establish safe operating habits.
2. Matters that stamping workers should pay attention to
1. Maintain a good mental state
When operating the punching machine, you must maintain a good mental state. You must not operate the punching machine when you are in a bad mental state. If you have something on your mind, you must ask for leave from the factory or transfer to other positions.
2. Ensure concentration
During the work process, you cannot talk to others, let alone look at your mobile phone or make or receive calls. You cannot do anything else that has nothing to do with operating the punch press.
3. A calm attitude
When you encounter a situation where the material is not discharged smoothly or the product is stuck in the mold, you must calmly stop the machine to deal with it. Don't be impatient. Never put your hands into the mold area. Don't imagine that your hands are faster than the machine tool; once is a lifelong regret!
4. It is strictly forbidden to put your hands into the working area
90% of punch press injuries are caused by workers putting their hands into the working area. Under no circumstances should hands enter the working area. This is the first guarantee of safety for stamping workers! Manual safety tools must be used!
5. Reasonable clothing
When wearing work clothes, the collar and cuffs must be tight to a certain extent. For female workers, those with long hair should wear work hats and press their hair into the hats. You cannot wear a skirt to operate the punch press.
6. Learn the company's safety regulations and operating manuals
Frequently study the safety production specifications and systems formulated by the company to establish a sense of safety production.
As long as the matters that need attention are strictly implemented in daily production according to the requirements, stamping is actually not that dangerous. Just like driving a car, if you keep your car in good condition, stay focused, and fully comply with traffic regulations, you can drive safely on the road. The same is true for stamping. If you keep the press in good condition, operate it safely, and fully comply with the press operating manual, you can also operate the press safely!





