Non-standard tungsten carbide end mills are more common in some industries, especially stainless steel tungsten carbide end mills, vertical tungsten carbide end mills, titanium alloy tungsten carbide end mills, etc., which are more commonly used non-standard tools, so how to distinguish these tungsten carbide end mills Is the end mill different? Is the structure of different types of non-standard tungsten carbide end mills the same?
The design of non-standard tungsten carbide end mill manufacturers usually requires manual calculation and drawing. Whenever tool parameters or design requirements change (although the change may be very small), recalculation and redrawing are very complicated. Although the parameters of various non-standard tools are different, the structure of each tool is basically fixed. Take the reamer as an example. When the size of the tool changes (such as an increase in the hole diameter), the basic structure of the reamer remains unchanged, but only some dimensional parameters change.
Different types of non-standard tungsten carbide end mills have different structures and need to build their own physical models. For non-standard tools of the same kind but with different applications, it is also necessary to consider whether to build a solid model separately. Before establishing each type of physical model, it is necessary to determine the basic mechanism characteristics of this type of tool, and to typify and conceptualize these characteristics. Some unimportant or uncommon details (such as chamfering, embossed grooves, etc.). ) To avoid increasing the workload of parameterization, and the size of each basic feature needs to be determined.
When the external processing conditions change, the structural dimensions of the non-standard tungsten carbide end mill should be changed accordingly to meet the new processing conditions. In order to achieve this requirement, the solid model can only be converted into a non-standard global part drawing by modifying the feature parameters.
The use of different non-standard tools is also different, if you do not understand the use of the matter, you can understand clearly with the merchant.
