When the last cut of the mold is finished, the most common problem is scratches on the surface at the cutting point caused by operator error. The manual hand wheel retraction function is an optional function in FANUC (needs to be added separately, standard for new generations). When the automatic running program starts cutting, it switches to the hand wheel retract working state, controls the feed speed with the hand wheel, and detects the cutting. When the position and Z-axis height are correct, turn off this function to allow the program to run normally. This function is useful for debugging new programs, preventing tool length compensation errors, and effectively preventing machine collisions; G67.2/G67.3, 6410; 6401#2; 6401# 6; Hope it is useful to everyone. Function code: A02B-0339-J998, diagnostic number: 1157#6
FANUC memory card program editing and operating software
important Notice! ! ! The old model βiI 12/10000-B has been discontinued! The new model is changed to βiI 12/12000-B, and the shaft diameter is also changed to 38mm.
important Notice! ! FANUC β12/12000 spindle upgrade supplementary notice
The significance of automatic backup of FANUC system data
