Feb 16, 2025 Leave a message

It is the key to keep the mold from rusting!

 

What is anti-rust oil? Rust often refers to the corrosion of ferrous metals in the air due to the electrochemical reaction caused by the participation of water and oxygen. Anti-rust oil mainly uses the rust inhibitor in it to form a protective film on the metal surface, isolating water and oxygen to play an anti-rust role.
Classification of common anti-rust oils for mechanical parts processing
1. Thin layer anti-rust oil The oil film is thin and the amount is small. It forms a thin anti-rust film on the surface of the workpiece, which does not affect the appearance of the product. It is easy to clean and has good anti-rust performance. It is suitable for anti-rust and sealing of parts in the automotive, hardware and electronic industries.
2. Replacement anti-rust oil has dehydration performance and is suitable for products that are not completely dried after the workpiece is cleaned. It can replace the water and is easy to clean in the subsequent sequence. It is often used for anti-rust and sealing of rust between processes.
3. Hard film anti-rust oil has excellent anti-rust performance in humid and salt spray environments. It is generally suitable for working conditions with harsh environments such as shipping and hulls, chassis and equipment that require high anti-rust performance.

4. Water-based rust preventives are used with water, which is low-cost and widely used for rust prevention between processes of ferrous metals, alloy steels and non-ferrous metal products, with a short rust prevention period.
About the selection of rust-proof oil
1. Choose according to the material of the product. Different metal materials have different requirements for rust-proof oils. For example, cast iron and copper have different requirements for rust resistance.
2. Choose according to the rust prevention cycle. For short-term rust prevention, you can use rust-proof oils with lower viscosity and thinner oil films. For rust prevention with a longer cycle, you need rust-proof oils with higher viscosity and thicker oil films.
3. Choose according to the product structure and usage method. For example, smaller products can be rust-proofed by immersion, and larger and more complex products can be rust-proofed by spraying or brushing. Regardless of which method of use, you should ensure that an effective rust-proof film is formed on each part to avoid local rust (it should also be noted that the operator's hands should avoid direct contact with the metal surface. Human sweat contains rust-causing substances such as chloride ions and lactic acid, which are easy to form handprint-like rust on the surface of the workpiece).

4. Choose according to the subsequent processing technology and assembly requirements, such as the later processing technology, storage environment, packaging conditions, and whether cleaning is required before assembly.
Methods and precautions for using anti-rust oil
1. Immersion method: The advantage is that it can form a uniform anti-rust film on the surface to ensure complete coverage of the product, and the cost is low. The disadvantage is that it is only suitable for small products. Use low-viscosity anti-rust oil, and the immersion tank must have a good drainage system.
2. Spray method: Suitable for large and complex products. High-efficiency sprayers must be used. It is easy for the product to fail to fully form an anti-rust film. The working environment requires good ventilation performance when using it.
3. Brushing method: This method is simple to use, but it must ensure that every position of the workpiece is brushed, and the brush must be kept clean before use.
4. Flushing method: High efficiency, recycling, and cost saving, but it is necessary to regularly drain the products in the tank and replace them regularly to avoid excessive moisture and other substances affecting the anti-rust effect.

The above points are some basic knowledge about the selection and use of anti-rust oil. In the production process, rust is still easy to occur even after using anti-rust oil. Common reasons are: too much moisture on the workpiece surface, the anti-rust film cannot be fully formed on the workpiece, the anti-rust oil has been used for a long time without being replaced, a large amount of moisture and dust remain in the oil, the anti-rust film on the workpiece surface is not fully formed before packaging, the temperature difference in the package causes condensation of water vapor, the rust is more serious, the packaging material or quality does not meet the process requirements, etc.

Send Inquiry

whatsapp

skype

E-mail

Inquiry