Jun 07, 2026 Leave a message

Plastic molds

 

A. Injection molds-TV casings, keyboard buttons, electronic product housings, computer peripherals, toys, household goods (most widely used)

B. Blow molds-Beverage bottles

C. Compression molds-Bakelite switches, technical ceramic tableware

D. Transfer molds-Integrated circuit components

E. Extrusion molds-Hoses, plastic bags

F. Thermoforming molds-Transparent molded packaging shells

G. Rotational molds-Soft plastic dolls/toys

Key considerations for plastic mold design include:


1. The gate should be located at the thickest section of the part to ensure smooth and complete mold filling;
2. Ideally, place the gate where it does not affect the product's appearance or function, such as along an edge or at the bottom;
3. A cold slug well is often placed at the end of the runner near the gate, equipped with a puller pin to facilitate runner ejection;
4. For large or flat parts, multi-point gating is recommended to prevent warping, deformation, or short shots;
5. The gate location should minimize the plastic flow path to reduce pressure loss and facilitate mold venting;
6. Avoid placing gates near slender cores to prevent the melt stream from directly impacting the core, which could cause deformation, misalignment, or bending;
7. Gate dimensions depend on the part's size, geometry, structure, and plastic type; one can start with smaller dimensions and adjust them based on mold trial results;
8. Use mold flow analysis or experience to determine if weld lines (knit lines) caused by gate placement will affect appearance or function; cold slug wells can be added to mitigate this issue;
9. For multi-cavity molds, use symmetrical gating for identical parts; when molding different parts in the same mold, prioritize placing the largest part closest to the main runner.

Key Points to Note


I. Do not focus solely on product design while neglecting plastic mold manufacturing.

During product development or prototyping, some users focus initially only on the product's research and development, neglecting communication with the plastic mold manufacturer. Contacting mold manufacturers early, once the preliminary product design is established, offers two key benefits:

1. It ensures the product design is conducive to good molding processes, avoiding the need to modify a finalized design due to manufacturing difficulties.

2. It allows the mold maker to begin design preparations early, preventing oversights caused by rushing that could delay the project schedule.

3. Producing high-quality plastic molds requires close collaboration between the supplier and the client; this is the only way to ultimately reduce costs and shorten lead times.

II. Do not focus solely on price; consider quality, lead time, and service comprehensively.

1. There are many types of molds, broadly categorized into ten major classes. The type of mold selected depends on specific requirements regarding part material, physical and chemical properties, mechanical strength, dimensional accuracy, surface finish, service life, and cost-effectiveness.

2. High-precision molds require machining on high-precision CNC machine tools and strict adherence to material and molding process standards; they also necessitate the use of CAD/CAE/CAM technologies for design and analysis.

3. Certain parts have unique molding requirements that necessitate advanced technologies such as hot runner systems, gas-assisted molding, or nitrogen gas cylinders.

4. Manufacturers should possess equipment such as CNC machines, EDM (Electrical Discharge Machining) units, wire-cut EDM machines, CNC copy milling machines, high-precision grinders, and high-precision CMMs (Coordinate Measuring Machines), as well as computer design capabilities and relevant software.

5. For large stamping molds (such as those for automotive body panels), factors such as the press's blank-holding mechanism, edge lubrication systems, and multi-station progressive capabilities must be considered. Beyond press tonnage, one must also consider the stroke rate, feeding mechanisms, and protection systems for both the press and the mold.

6. Not every enterprise possesses or has mastered the aforementioned manufacturing methods and processes. When selecting a partner, it is crucial to evaluate their manufacturing capabilities-looking beyond hardware to consider management standards, machining experience, and technical expertise.

7. Quotes from different manufacturers for the same mold can vary significantly. You should pay neither more than the mold's true value nor less than its actual cost. Like your own business, mold manufacturers need to earn a reasonable profit. Ordering a mold based on an exceptionally low quote is often the beginning of trouble. Users should make a comprehensive assessment based on their specific requirements.

III. Avoid dealing with multiple parties; ideally, opt for a "one-stop" service that covers both plastic mold manufacturing and product processing.

1. Possessing a qualified mold (one that produces acceptable test samples) does not guarantee the mass production of qualified products. Success depends largely on the choice of processing machinery, the molding parameters (such as temperature and cycle time), and the technical proficiency of the operators.

2. A high-quality mold requires high-quality molding processing; therefore, an integrated "one-stop" service is preferable to minimize the need for coordination among multiple parties. If such an arrangement is not feasible, a single party should be designated to take full responsibility, and this arrangement must be clearly stipulated in the contract.

Send Inquiry

whatsapp

skype

E-mail

Inquiry