1. Cnc vmc When the tool moves to the surface of the workpiece 30~50mm, it is necessary to confirm that the residual axis of the coordinate axis and the coordinate values of the X and Y axes are synchronized with the mode while maintaining the feed. 2. For some tools that require testing tools, you can use the "incremental" method. For example, the length of the borehole can be tested. After the test is passed, the entire length can be reached. The tool data using the tool radius compensation function can be modified from large to small. 3. In the cnc vmc trial cutting and machining process, after changing the tool, you should re-measure the tool length and modify the tool compensation value and tool compensation number.
4. When searching the program, pay attention to whether the position pointed by the cursor is reasonable and accurate, and observe whether the tool coordinates and cnc vmc movement direction are correct. 5. After modifying the cnc vmc program, carefully calculate and carefully check the modified workpiece. 6. When performing manual feed and manual continuous feed operations, you need to check whether the position selected by each switch is correct, find the positive and negative directions, and then press the button before cnc vmc operation.
