Mar 07, 2025 Leave a message

Precision detection taboos after the spindle is installed with a tool

 

Taboos in the application of milling tools
Taboo for precision detection after the tool is installed on the spindle
When machining workpieces with higher precision or using older equipment, it is necessary to check the radial runout of the tool after the tool is installed on the spindle to determine whether it meets the machining needs.

Due to the existence of clearance or cumulative errors, the error may be magnified after the tool is installed on the tool holder and then on the spindle. Therefore, the original 0.01mm error may be magnified several times or more than ten times when reflected in the tool cutting position, thereby affecting the machining quality and tool life, as follows.

Send Inquiry

whatsapp

skype

E-mail

Inquiry