The main processing objects of desktop cnc milling machine

(1) Box parts: Box parts generally refer to parts that have more than one hole system, a cavity inside, and a certain proportion of length, width, and height. (2) Complex curved surface: It is difficult or even impossible to complete complex curved surface using ordinary machining methods. (3) Special-shaped parts: Special-shaped parts are parts with irregular shapes, and most of them require multi-station mixed processing of points, lines and surfaces, such as shift forks. (4) Disc, sleeve, plate parts: with keyway, or radial hole, or distributed hole system on the end face, curved disc sleeve or shaft parts, such as flanged shaft sleeve, keyway or square head The shaft parts, as well as the plate parts with more porous processing, such as various motor covers. Disc parts with distributed holes and curved surfaces on the end surface should choose a vertical machining center, and a horizontal machining center with radial holes should be selected. (5) Periodically put into production parts: When processing parts with a desktop cnc milling machine, the time required mainly includes basic time and preparation time, of which preparation time accounts for a large proportion, such as: process preparation and programming of the first piece of parts, trial cutting, etc. These times are very long, and the processing center can be used to store the contents of these times for repeated use in the future. In this way, you can save this time when processing the part later. The production cycle can be greatly shortened.