Jul 29, 2025 Leave a message

These factors directly determine the processing accuracy of your mold

 

Machining accuracy refers to the degree of conformity between the actual geometric parameters (size, shape and position) of the parts after machining and the ideal geometric parameters. In mechanical machining, errors are inevitable, but the errors must be within the allowable range. Through error analysis, the basic laws of its changes can be mastered, so that corresponding measures can be taken to reduce machining errors and improve machining accuracy.
1. The main causes of errors in mechanical machining
1. Spindle rotation error. The spindle rotation error refers to the amount of change of the actual rotation axis of the spindle at each moment relative to its average rotation axis. The main causes of spindle radial rotation error are: coaxiality error of several sections of the spindle journal, various errors of the bearing itself, coaxiality error between bearings, spindle deflection, etc.
2. Guide rail error. The guide rail is the benchmark for determining the relative position relationship of each machine tool component on the machine tool, and it is also the benchmark for the movement of the machine tool. Uneven wear and installation quality of the guide rail are also important factors causing guide rail errors.
3. Transmission chain error. The transmission error of the transmission chain refers to the error of relative movement between the transmission elements at the first and last ends of the internally connected transmission chain. Transmission error is caused by manufacturing and assembly errors of each component in the transmission chain and wear during use.
4. Geometric error of the tool. Any tool will inevitably wear out during the cutting process, which will cause changes in the size and shape of the workpiece.
5. Positioning error. One is the datum misalignment error. The datum used to determine the size and position of a certain surface on the part drawing is called the design datum. The datum used to determine the size and position of the processed surface after processing in the process drawing is called the process datum. When processing the workpiece on the machine tool, it is necessary to select several geometric elements on the workpiece as the positioning datum during processing. If the selected positioning datum does not coincide with the design datum, a datum misalignment error will occur. The second is the inaccurate manufacturing error of the positioning pair.
6. Errors caused by deformation of the process system under force. One is the stiffness of the workpiece. If the stiffness of the workpiece in the process system is relatively low compared to the machine tool, tool, and fixture, the deformation of the workpiece caused by insufficient stiffness under the action of the cutting force will have a greater impact on the processing accuracy. The second is the stiffness of the tool. The rigidity of the external cylindrical turning tool in the normal direction of the machining surface is very large, and its deformation can be ignored. When boring an inner hole with a smaller diameter, the rigidity of the tool bar is very poor, and the deformation of the tool bar under stress has a great influence on the hole machining accuracy. The third is the rigidity of the machine tool components. The machine tool components are composed of many parts. There is no suitable simple calculation method for the rigidity of the machine tool components so far. At present, the rigidity of the machine tool components is mainly determined by experimental methods.
7. Errors caused by thermal deformation of the process system. The thermal deformation of the process system has a relatively large impact on the machining accuracy, especially in precision machining and large-scale machining. The machining error caused by thermal deformation can sometimes account for 50% of the total error of the workpiece.
8. Adjustment error. In each process of mechanical machining, the process system must always be adjusted in one way or another. Since the adjustment cannot be absolutely accurate, adjustment errors are generated. In the process system, the relative position accuracy of the workpiece and the tool on the machine tool is guaranteed by adjusting the machine tool, tool, fixture or workpiece. When the original accuracy of machine tools, tools, fixtures and workpiece blanks meets the process requirements without considering dynamic factors, the influence of adjustment errors plays a decisive role in processing accuracy.
9. Measurement error. When measuring parts during or after processing, the measurement accuracy is directly affected by the measurement method, measuring tool accuracy, workpiece and subjective and objective factors.
2. Process measures to improve processing accuracy
The methods to ensure and improve processing accuracy can be roughly summarized as follows:
1. Reduce original errors
Improving the geometric accuracy of the machine tools used for part processing, improving the accuracy of fixtures, measuring tools and tools themselves, controlling the force, thermal deformation, tool wear, deformation caused by internal stress, and measurement errors of the process system are all directly reducing the original errors. In order to improve the machining accuracy, it is necessary to analyze the various original errors that cause machining errors, and take different measures to solve the main original errors that cause machining errors according to different situations. For the machining of precision parts, the geometric accuracy, rigidity and control of machining thermal deformation of the precision machine tools used should be improved as much as possible; for the machining of parts with forming surfaces, it is mainly how to reduce the shape error of the forming tool and the installation error of the tool. This method is a basic method widely used in production. It tries to eliminate or reduce these factors after finding out the main factors that cause machining errors. For example, the turning of slender shafts now adopts the large-cut reverse turning method, which basically eliminates the bending deformation caused by axial cutting force. If supplemented by a spring tip, the influence of thermal elongation caused by thermal deformation can be further eliminated.
2. Compensation of original error The error compensation method is to artificially create a new error to offset the original error in the original process system. When the original error is negative, the artificial error takes a positive value, otherwise, it takes a negative value, and tries to make the two equal in size; or use one original error to offset another original error, and also try to make the two equal in size and opposite in direction, so as to achieve the purpose of reducing machining errors and improving machining accuracy.
3. Transferring original errors The error transfer method is essentially to transfer the geometric errors, force deformations and thermal deformations of the process system. There are many examples of error transfer methods. For example, when the machine tool accuracy does not meet the requirements of part processing, it is often not to improve the machine tool accuracy blindly, but to find ways to create conditions from the process or fixture to transfer the geometric error of the machine tool to the aspect that does not affect the processing accuracy. For example, the grinding of the spindle taper hole to ensure its coaxiality with the journal is not guaranteed by the rotation accuracy of the machine tool spindle, but by the fixture. After the machine tool spindle and the workpiece are connected with a floating connection, the original error of the machine tool spindle is transferred.
4. Average the original error During processing, due to the existence of the blank or the previous process error, the processing error of this process is often caused, or due to the change of the workpiece material properties, or the process change of the previous process (such as the original cutting process is cancelled after the blank is refined), the original error changes greatly. To solve this problem, it is best to use the method of adjusting the average error in groups. The essence of this method is to divide the original error into n groups according to its size, and the error range of each group of blanks is reduced to 1/n of the original, and then adjust the processing according to each group.
5. Homogenize the original error. For shafts and holes that require high matching accuracy, grinding technology is often used. The grinding tool itself does not require high precision, but it can perform micro-cutting on the workpiece during relative motion with the workpiece, and the high points are gradually ground away (of course, the mold is also ground away by the workpiece), and finally the workpiece reaches a very high precision. This process of friction and wear between surfaces is the process of continuously reducing errors, which is the error averaging method. Its essence is to compare closely related surfaces with each other, check each other to find differences from the comparison, and then make mutual corrections or use each other as reference processing, so that the errors of the processed surfaces of the workpiece are continuously reduced and averaged. In production, many precision reference parts (such as flat plates, rulers, etc.) are processed using the error averaging method.
6. In-situ processing method In processing and assembly, some precision problems involve the relationship between parts or components, which is quite complicated. If the precision of the parts and components themselves is blindly improved, it is sometimes not only difficult, but even impossible. If the in-situ processing method (also known as the self-processing and repair method) is adopted, it may be very convenient to solve the seemingly very difficult precision problems. In-situ machining is often used in mechanical parts processing as an effective measure to ensure parts processing accuracy.

 

 

Send Inquiry

whatsapp

skype

E-mail

Inquiry