Dongguan Titanium Alloy 4 flute end mill is mainly a tool for milling, a rotary tool with one or more teeth. When it is working, each cutter tooth cooperates in order to cut off the working allowance. The main purpose of Dongguan titanium alloy milling cutter is to process planes, steps, forming surfaces and grooves on the milling machine. Below, I will find the basic selection techniques for titanium alloy milling cutters, and choose a good product that suits you.
1. When choosing a titanium alloy 4 flute end mill, be sure to check the alloy 4 flute end mill cutter body and tool holder, and pay attention to whether there is any damage or rust.
2. Does the alloy 4 flute end mill be used on CNC machining centers or on ordinary milling machines?
3. For the material and hardness of the titanium alloy 4 flute end mill, pay attention to these functional problems and be careful of being deceived.
4. The specifications of alloy 4 flute end mill, such as: blade length, overall length, blade diameter, shank diameter, etc.
If it is used on a CNC machining center, solid carbide should be used, and white steel can be used on ordinary milling machines.
The hardness of 4 flute end mill for white steel is softer than that of cemented carbide 4 flute end mill. High-speed steel cutters are cheap and have good toughness, but they are not strong, easy to use, and relatively poor wear resistance and thermal hardness; high-speed steel alloy milling cutters have a thermal hardness of about 600 degrees and a hardness of about 65HRC, which is obviously suitable When white steel mills harder materials, it is easy to burn the knife if the coolant is not in place. This is one of the reasons for the low thermal hardness.
