There are heavy-duty and light-duty models in the heavy-duty V650 CNC machining center market. They should be selected according to the actual working conditions of the customer. The column is fixed and can be used as a product and a mold. The whole machine has the advantages of good structural rigidity, high precision, low failure rate, etc., and is well received by customers. The product has high configuration, high precision and high stability. Mass production and processing of larger hardware parts, or more small hardware parts at a time, can be drilled, tapped and milled. It is suitable for materials of copper and aluminum parts, castings and general steel parts. Each machining part can replace 24 tools, and the overall structure of the machine tool is solid. The structure of the machine tool is optimized through finite element analysis, and the rigidity is stronger and the structure is more stable. The composite column supported by the innovative column and the tool magazine has stronger rigidity, and the tool magazine is more stable and does not deform. The high-rigidity spindle can be equipped with a large-torque device to increase the production efficiency by more than 30%.
1. Rigid machine tools must have low failure rate and high reliability production occasions.
2. It is especially suitable for the high-speed reciprocating movement of the spindle box.
3. Short throat depth, high rigidity and compact structure, high torque device, production efficiency increased by more than 30%, suitable for heavy-duty processing of ferrous metals.
Heavy-duty V650 CNC machining center adopts heavy-duty guide rails for the X, Y and Z axes. The width of the linear guide is 45mm, and the linear guide sliding seat is widened and enlarged, especially the Z-axis sliding seat is lengthened. Roller heavy-duty linear guides can not only meet customers' requirements for high-speed and high-precision, but also have strong cutting force and increase the service life of machine tool guides.
In the heavy-duty V650 CNC machining, large hardware parts are produced in batches, or more small hardware parts are clamped at a time. It can be drilled, tapped, and milled. It is suitable for materials of copper and aluminum parts, castings and general steel parts. Up to 24 tools can be replaced for each machining part. The machining center adopts the mature and stable Taiwan's new generation control machining center system or the Japanese Mitsubishi system on the market, and is equipped with 24 disc-type BT40 tool magazines. The main shaft adopts BT40 150 large diameter main shaft. The overall weight of the fuselage is about 5 tons.
