The basic composition of a CNC machine tool includes a processing program carrier, a CNC device, a servo drive device, the main body of the machine tool and other auxiliary devices. The basic working principles of each component are summarized below.
Processing program carrier
High-speed CNC machine tools
When a CNC machine tool is working, workers do not need to directly operate the machine tool. To control the CNC machine tool, it is necessary to compile a processing program. The part processing program includes the relative motion trajectory of the tool and the workpiece on the machine tool, process parameters (feed amount, spindle speed, etc.) and auxiliary motion. The part processing program is stored in a program carrier with a certain format and code, such as punched tape, cassette tape, floppy disk, etc., and the program information is input to the CNC unit through the input device of the CNC machine tool.
CNC device
The numerical control device is the core of the numerical control machine tool. Modern numerical control devices all adopt the form of CNC (Computer Numerical Control). This kind of CNC device generally uses multiple microprocessors to realize numerical control functions in the form of programmed software, so it is also called Software NC (Software NC). CNC system is a kind of position control system, it is based on the input data to interpolate the ideal motion trajectory, and then output to the execution component to process the required parts. Therefore, the numerical control device is mainly composed of three basic parts: input, processing and output. And all these tasks are reasonably organized by the computer system program, so that the entire system can work in a coordinated manner.
1) Input device: Input the numerical control instruction to the numerical control device. According to the different program carrier, there are different input devices. There are mainly keyboard input, disk input, CAD/CAM system direct communication input and DNC (direct numerical control) input connected to a higher-level computer. There are still many systems that still retain the paper tape input form of photoelectric readers.
(1) Paper tape input method. The part program can be read in with a paper tape photoelectric reader to directly control the movement of the machine tool, or the content of the paper tape can be read into the memory, and the part program stored in the memory can be used to control the motion of the machine tool.
(2) MDI manual data input mode. The operator can use the keyboard on the operation panel to input the instructions of the processing program, which is suitable for relatively short programs.
In the edit state of the control device (EDIT), use the software to input the processing program and store it in the memory of the control device. This input method can reuse the program. This method is generally used for manual programming.
On the numerical control device with conversational programming function, you can select different menus according to the questions prompted on the display, use the method of man-machine dialogue, and input the relevant size numbers to automatically generate the processing program.
(3) Adopt DNC direct numerical control input method. Save the part program in the upper-level computer, and the CNC system receives subsequent program segments from the computer while processing. The DNC method is mostly used when using CAD/CAM software to design complex workpieces and directly generate part programs.
2) Information processing: the input device transmits the processing information to the CNC unit and compiles it into information that can be recognized by the computer. The information processing part stores and processes it step by step in accordance with the regulations of the control program, and then sends out position and speed commands to the servo through the output unit System and main motion control part. The input data of the CNC system includes: the contour information of the part (start point, end point, straight line, arc, etc.), processing speed and other auxiliary processing information (such as tool change, speed change, coolant switch, etc.). The purpose of data processing is to complete the insertion Preparations before the complement operation. The data processing program also includes tool radius compensation, speed calculation and processing of auxiliary functions.
3) Output device: The output device is connected with the servo mechanism. The output device receives the output pulse of the arithmetic unit according to the command of the controller, and sends it to the servo control system of each coordinate. After power amplification, the servo system is driven to control the machine tool to move as required.
Servo and measurement feedback system
Servo system is an important part of CNC machine tools, used to realize the feed servo control and spindle servo control of CNC machine tools. The function of the servo system is to convert the command information received from the numerical control device into the linear displacement or angular displacement motion of the execution parts of the machine tool after power amplification and shaping. Since the servo system is the last link of the CNC machine tool, its performance will directly affect the accuracy and speed of the CNC machine tool and other technical indicators. Therefore, the servo drive device of the CNC machine tool requires good fast response performance and accurate and sensitive tracking of the CNC device. The digital command signal sent out can faithfully execute the command from the numerical control device to improve the system's dynamic following characteristics and static tracking accuracy.
The servo system includes two parts, the drive device and the actuator. The drive device is composed of a spindle drive unit, a feed drive unit, a spindle servo motor, and a feed servo motor. Stepping motors, DC servo motors and AC servo motors are commonly used driving devices.
The measuring element detects the actual displacement value of each coordinate axis of the CNC machine tool and inputs it to the CNC device of the machine tool through the feedback system. The CNC device compares the feedback actual displacement value with the command value, and outputs to the servo system to reach the set value The required displacement command.
Machine body
The machine tool host is the main body of the CNC machine tool. It includes machine parts such as bed, base, column, beam, sliding seat, worktable, headstock, feed mechanism, tool post and automatic tool changer. It is a mechanical part that automatically completes various cutting processes on a CNC machine tool. Compared with traditional machine tools, the main body of CNC machine tools has the following structural characteristics:
1) Adopt a new machine tool structure with high rigidity, high shock resistance and less thermal deformation. Generally, methods such as improving the static stiffness of the structural system, increasing the damping, adjusting the quality of the structural parts and the natural frequency are used to improve the stiffness and seismic resistance of the machine tool host, so that the machine tool body can adapt to the needs of CNC machine tools for continuous and automatic cutting. Taking measures such as improving the layout of the machine tool, reducing heat generation, controlling temperature rise, and adopting thermal displacement compensation, can reduce the impact of thermal deformation on the host machine of the machine tool.
2) The extensive use of high-performance spindle servo drive and feed servo drive devices shortens the transmission chain of CNC machine tools and simplifies the structure of the machine tool mechanical transmission system.
3) The use of high transmission efficiency, high precision, no gap transmission devices and moving parts, such as ball screw nut pairs, plastic sliding guides, linear rolling guides, static pressure guides, etc.
Numerically controlled machine tool auxiliary device
Auxiliary devices are necessary supporting devices to ensure full use of the functions of CNC machine tools. Commonly used auxiliary devices include: pneumatic, hydraulic devices, chip removal devices, cooling and lubricating devices, rotary table and CNC indexing head, protection, lighting, etc. assisting equipments




