Feb 24, 2024 Leave a message

Chief Technical Engineer: 6 Suggestions For Controlling Product Quality

 

01 Don't determine the process easily, and don't change the determined process easily.

1) Find the root cause, main factors or main manifestations of the problem.

2) Easily changing the process actually conceals the real causes and problems.

02 Process control must have a strong sense of quantification and traceability

1) Mechanical parts are not affected by that factor, so don't ignore any details.

2) Any details should be controlled and recorded with data as much as possible.

3) Failure to control and trace process details will mislead the formulation of corrective and preventive measures.

03 You must be patient when solving problems

1) Don't expect too much to become fat in one sitting.

2) When you find an abnormal situation, don't ignore it because it seems to have nothing to do with the problem to be solved.

3) Don't fail to take action when you can't find the reasons and patterns. You can control and standardize the influencing factors of the analysis.

4) Review and review some experiences and rules from previous experiments and summaries.

5) Once you discover some experience and rules, go deeper and upgrade it into a theory. Even if it costs more, it will be worth it.

6) We must know that "a dike of thousands of miles is destroyed by a hole", and we must also know that "the foolish old man can move mountains".

picture

04 Establish a preventive mindset

1) The highest level of quality management is prevention, not how to save problems after they occur.

2) There must be signs before any quality problems occur. It depends on whether you have the methods, means and experience to monitor and identify them.

3) When the same quality problem occurs for the second time, great attention should be paid to it.

4) The daily process and result data should be sorted using certain tools, and patterns and trends should be found from the sorted results. These patterns and displayed trends need to be constantly revised.

5) Before processing the product, each control element must be as consistent as possible.

05 Quality control must have a management mindset

1) Don't expect to rely directly on craftsmen to achieve stable product quality.
2) Product quality is manufactured. Without management of direct manufacturers, the quality will never be stable.

3) Therefore, it is necessary to observe, pay attention to and study the performance and status of the direct product manufacturers, and manage and mobilize these performance and status.

4) If the performance and status of the direct manufacturer of the product are not controlled, you will never be able to accurately analyze the cause of the inaccuracy once a quality problem occurs.

5) Don't think that if the process control requirements stipulated in our current process disciplines are met, there will be absolutely no problem with product quality.

6) Therefore, our process control requirements must be continuously improved, and we must also manage people well.

06 Listen to more opinions and suggestions

1) Don't think that other people's opinions are worthless because they don't know the actual situation and can't solve the problem at once.
2) But they, especially the direct manufacturers of products, can give us a lot of tips and reminders.
3) If you can solve this problem, you don't have to listen to anyone else's opinions and suggestions; but when you can't figure it out, I suggest that everyone's opinions and suggestions should be listened to, and everyone should try and experiment, regardless of whether you agree or not. .
4) Quality management thinking often touches the forefront of technology. Even a casual sentence or complaint may guide or imply a major technological innovation direction. Therefore, professional technicians must pay attention to details and be good at capturing details.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry