In injection molds, the inclined roof structure is a very practical design, mainly due to its ejection and positioning functions. The design inspiration of this structure may come from actual production needs and continuous improvement of technology.
picture
The structure of "sloping roof on sloping roof" is a classic structure of molds and is often used in injection molds. The characteristic of this structure is that the ejection mechanism of the mold uses two inclined tops, one at the top and one at the bottom.
The function of the upward inclined roof is to push out the product in the mold to facilitate the removal of the product. The lower inclined roof is used to control the position of the product in the mold to ensure that the product will not move or fall due to the opening of the mold.
picture
The advantages of this structure include:
Convenient product removal: The upward sloping roof can eject the product from the mold, allowing the operator to easily remove the product.
Accurate positioning: The lower sloped roof can ensure the accurate position of the product in the mold and prevent the product from moving or falling when the mold is opened.
Improve production efficiency: Because this structure can easily take out the product and position it accurately, it can shorten the production cycle and improve production efficiency.
picture
The "sloping top on top of sloping top" structure is a classic mold structure that is suitable for various injection molds and can improve production efficiency and product quality.
Sloping roof structures have multiple functions in injection molds.
First, it can eject the product in the mold to facilitate the operator to take out the product. This is the most basic function of the sloped roof structure.
Secondly, the sloped roof can control the position of the product in the mold to ensure that the product will not move or fall due to the opening of the mold. This positioning function is very important to ensure product quality and production efficiency.
In addition, the inclined roof structure can also help the ejection mechanism to eject plastic products from the mold. There is generally no need to arrange additional ejector pins within 10~20mm around the inclined roof, which can simplify the design and manufacturing process of the mold.
In short, the inclined roof structure has multiple functions in the injection mold, including ejecting the product, positioning the product, and assisting the ejection mechanism. These functions are very important to ensure product quality and production efficiency.
