We often hear line rail and hard rail machining center, what is the difference between them? Which one is better to use? I believe that many people in the industry do not know, today we will introduce in detail what is Line rail machining center machine, what is the difference between the two, which one is better to use.
Line Rail Machining Center
The full name is linear guide rail machining center, which generally refers to rolling guide rail. Common structures include ball guide rail and roller guide rail. The difference is that the ball guide rail is a point contact type, and the roller guide rail is a line contact type. The principles are the same, and they are also rolled on the guide rail to drive sliding.
advantage:
1. The linear guide rail is supported by rolling parts, and its rolling and sliding performance is better than that of the hard rail, and there is no crawling phenomenon;
2. Due to its small friction coefficient, the moving speed is faster;
3. Also because the friction coefficient is small, the wear is small;
4. Generally, linear guide rails are made of better materials and more precise equipment, so their precision is also higher;
5. It is easy to maintain in the later stage. After the guide rail is worn out, it is convenient to replace the line rail, but the hard rail is more troublesome because the gap needs to be adjusted.
Disadvantages: Due to its smaller contact surface, its rigidity is lower than that of hard rail.
picture
Hard rail machining center
Generally, the guide rail and the bed are integrally cast, and the material number is generally not lower than HT250, and the Brinell hardness of the machine body is between HB180-HB240. After the guide rail part is quenched by high-frequency or super-audio frequency, the hardness is generally above HRC50°, which makes it have excellent wear resistance (the inlaid steel guide rail is also a kind of hard rail). The hard rails used in CNC machining centers are generally rectangular structures, commonly known as rectangular guide rails.
Advantages: The sliding contact surface of the hard rail is large, which makes the machine tool rigid and stable.
Disadvantages: Due to the large contact surface, the friction resistance is also large, the wear is fast, the moving speed is limited, and it is prone to defects such as crawling. Therefore, most machining center manufacturers use guide rail plastic coating technology to reduce hard rail wear and crawling defects.
Which is better, line rail or hard rail machining center?
The speed of the line rail is fast and the precision is high. It is suitable for high-speed machines and high-speed cutting. It is suitable for processing small precision molds. The track is pre-tightened to achieve zero gap between the tracks. The hard rail belongs to dry friction, with large load and high strength, suitable for heavy cutting. The movement of the hard rail requires a gap on the moving surface to move, and the coefficient of friction is large, which is prone to adhesion, resulting in machining errors, and is mostly used in heavy load situations. It is suitable for processing workpieces with high hardness and low precision requirements.
In fact, there is no difference between hard rail and line rail, it can only be said whether it is suitable. Because of their different processing points, line rail machining centers tend to process workpieces with low hardness and high precision, while hard rail machining centers focus on processing workpieces with low hardness, high precision and low requirements.




