There are many operators who enter the industry want to learn programming. Although everyone is looking for us to purchase equipment, they also know about the operators in the industry. Today I will share with you some tips on self-learning programming, just for reference. Hope to bring you some help:
1. First, we must understand that the programming of the machining center is for the operation of the machine, and to cooperate with the operation of the machine to complete the processing and production indicators, we must first put our mindset. Without the accumulated experience of the machine, I feel that programming is not good, after all, it depends on the final processing. The effect of the finished product.
2. When writing the program list, you must write clearly, what kind of knife to use, how long, and whether the program is roughing or finishing. If it is roughing or semi-finishing, you can choose the old tool. To minimize the work of operating the machine, put the programs of the same tool together as much as possible to reduce the number of tool changes.
Third, the detailed points to be written in the program list, all problems in the processing process must be taken into consideration. It's not enough to finish writing the program sheet. You have to talk to the machine operator face to face about your processing methods and understanding of the mold to be processed. What is rough and precise, where there may be problems, and how to solve problems should be explained clearly.
4. Visit the workshop frequently. At the beginning of the first step, communicate with fitters, drillers, wire cutters, and spark machine masters. If you need to debug, you should check the finished effect of the workpiece after actual processing, sometimes programming Think about it more, it will save a lot of things for the people behind.
Five, have their own learning methods. In fact, everyone's learning methods and learning conditions are different. For example, when some friends first entered the industry, there was a teacher who taught them hand-in-hand. In this way, there are opportunities for practical operation, and you will quickly master the introduction of operation and programming. Some people read books and learn by themselves faster, while others need practical exercises to consolidate. There are a lot of free teaching resources, and choosing your own method is very important for learning machining center programming.
6. Learning and accumulating experience In daily work, you should consult the master in the workshop. On some occasions, you can show the program you have written. Don't be afraid of making mistakes, and don't be afraid of difficulties. When thinking about problems, you can learn from the "15-minute rule" in Western psychology. If you don’t have a clue after thinking about a problem for 15 minutes, then it may be that you have a shortcoming or even a blind spot in your cognition. At this time, you can tentatively schedule the work in progress, ask colleagues if there is a way to solve the problem, and express your own thinking objectively, so that you can reflect the meaning of thinking for programming.
7. Starting from the most basic machining center operation, programming that doesn’t know how to do it is like talking on paper. Only after understanding the path of the tool can you have the most suitable tool movement mode. This kind of experience cannot be realized without personal experience. . Only by personally practicing can we know what is lacking in the skills that we have mastered. In addition, programming is a skill related to design, which requires inspiration on the basis of rich practical operations. The development of numerical control technology in recent years has shown a blowout trend, and programming technology is also upgrading and developing. Learn, think, practice and master the technology of programming.




