Aug 14, 2021 Leave a message

Summer Metal Cnc Machine V1370 Equipment Moisture-proof Work Can Not Be Ignored


The moisture-proof work of metal cnc machine v1370 equipment in summer cannot be ignored:


In the hot summer, the continuous rain makes the air unusually humid, which makes us very uncomfortable in the hot summer, especially the body is prone to some very uncomfortable sweat stains, humid and very uncomfortable, but you know you Is the machine tool actually very uncomfortable?


Moisture is the enemy of metal cnc machine v1370. It is one of the main causes of inaccuracy and electrical failure. Moisture of the machining center machine tool first manifests itself in the decline of the electrical control box of the equipment and accelerated insulation aging. According to the current media theory, the increase in environmental humidity has a serious impact on the electrical control, the physical accuracy of the camera bed, the circuit line, and the control accuracy.


It is worth noting that the process of insulation circuit destruction is often brittle under the action of heat, cracks after vibration, and after moisture enters the cracks, very low voltage will also cause discharge, causing electrical components to short-circuit or disconnect, and cause circuit failures. . Secondly, as the humidity of the integrated circuit board inside the system increases, its oxidation and corrosion will generally increase, which will increase the contact resistance at the conductor connection, causing local overheating and causing system failure. In terms of accuracy, some precision control components are also afraid of moisture corrosion. , So the accuracy is inaccurate. Therefore, electrical equipment that has been in a humid environment for a long time, if moisture-proof measures are not used, its service life will be greatly reduced, causing leakage and short-circuit, leading to serious electrical failures and accidents. Therefore, measures must be taken to prevent the occurrence of oxidation reactions to prevent environmental factors from causing changes in electrical properties and damage to electrical products due to changes in mechanical properties.


The moisture-proof measures for machining center machine tools are as follows:


1. The electric cabinet should be sealed as far as possible, and moisture-absorbing and dust-proof sponge should be installed at the heat dissipation hole, and customers are required to replace the sponge regularly;


2. Use spraying, dipping, potting and other processes to waterproof important devices;


3. Use electronic components and structural materials with low hygroscopicity;


4. Penetrate the surface of the electronic circuit board with acrylic film protective agent or silicone resin film protective agent to avoid moisture intrusion;


5. For small machining center machine tools that are not frequently used, place an appropriate amount of desiccant in the electrical cabinet, and then cover it with a protective cover;


6. Clean the electrical cabinets in each workshop to ensure the cleanliness of the electrical cabinets;


7. In summer, perform a comprehensive inspection and replacement of some parts of the equipment according to the actual production, especially the replacement of the aging hardened wire in the electrical cabinet or the motor wire.


Send Inquiry

whatsapp

skype

E-mail

Inquiry