Jul 19, 2021 Leave a message

Teach You The Unfolding Calculation Principles Of Various Types Of Sheet Metal Bending


When sheet metal is bent and flattened, one side of the material will be elongated and one side will be compressed. The factors affected are: material type, material thickness, material heat treatment and processing bending angle.


Expansion calculation principle:


1. The outer layer of the sheet material is subjected to tensile stress during the bending process, and the inner layer is subjected to compressive stress. From tension to compression, there is a transition layer that is neither tension nor compression is called the neutral layer; the neutral layer is in the bending process The length is the same as before bending, so the neutral layer is the basis for calculating the unfolded length of the bending part.


2. The position of the neutral layer is related to the degree of deformation. When the bending radius is larger and the bending angle is smaller, the degree of deformation is smaller. The position of the neutral layer is close to the center of the sheet thickness; when the bending radius becomes smaller, the bending angle increases. When it is large, the degree of deformation increases, and the position of the neutral layer gradually moves to the inner side of the bending center. The distance from the neutral layer to the inner side of the sheet is represented by λ.


The basic formula for expansion calculation:


Unfolded length = inside material + inside material + compensation amount


Send Inquiry

whatsapp

skype

E-mail

Inquiry