Small processes such as deburring and chamfering cannot be underestimated in work. Today, the editor has summarized some information shared in the past, hoping to help everyone in their work.
The first
TRUMPF electric tool Deburrer deburrer, this small tool can remove burrs directly on the board surface, and the trimmed edges are free of oxidation. Small tools like this can be used at inclination angles of 30°, 45°, and 60°, and can also be used on the curved edge.
The second kind
Germany Lima's all-round equipment, deburring and chamfering compound machine, can deburr, chamfer, surface drawing, and treat metal surfaces in one go.
10 easy ways to deburr
1. Manual deburring
This is also a method commonly used by general enterprises, using files, sandpaper, grinding heads, etc. as auxiliary tools. The files have manual filing and pneumatic shifting.
picture
Brief comment:
The labor cost is expensive, the efficiency is not very high, and complex cross holes are difficult to remove.
The technical requirements for workers are not very high, and it is suitable for products with small burrs and simple product structures.
2. Deburring the die
Use a die and a punch to remove burrs.
Brief comment:
A certain punching die (rough die + fine punching die) production fee is required, and a shaping die may also be required.
It is suitable for products with relatively simple parting surfaces, and the efficiency and deburring effect are better than manual work.
3. Grinding and deburring
This type of deburring includes vibration, sandblasting, roller and other methods, which are currently used by many companies.
Brief comment:
There is a problem that the removal is not very clean, and it may be necessary to manually deal with the remaining burrs or use other methods to remove burrs.
Suitable for small products with larger batches.
4. Frozen deburring
Use cooling to quickly embrittle the burrs, and then spray projectiles to remove the burrs.
Brief comment:
The equipment price is about 20,000 to 300,000 yuan;
Suitable for products with smaller burr wall thickness and smaller products.
5. Hot blast deburring
It is also called thermal deburring and explosion deburring. By passing some flammable gas into an equipment furnace, and then through the action of some media and conditions, the gas explodes instantly, and the energy generated by the explosion is used to dissolve and remove burrs.
Brief comment:
The equipment is expensive (prices in the millions), has high operational technical requirements, low efficiency, and has side effects (rust, deformation);
Mainly used in some high-precision parts fields, such as automotive and aerospace precision parts.
6. Engraving machine deburring
Brief comment:
The price of the equipment is not very expensive (tens of thousands), and it is suitable for applications where the space structure is simple and the required deburring locations are simple and regular.
7. Chemical deburring
Using the principle of electrochemical reaction, parts made of metal materials can be automatically and selectively deburred.
Brief comment:
It is suitable for internal burrs that are difficult to remove, and is suitable for small burrs (thickness less than 7 wires) on pump bodies, valve bodies and other products.
8. Electrolytic deburring
An electrolytic machining method that uses electrolysis to remove burrs from metal parts.
Brief comment:
The electrolyte is corrosive to a certain extent, and the parts near the burrs are also affected by electrolysis. The surface will lose its original luster and even affect the dimensional accuracy. The workpiece should be cleaned and rust-proofed after deburring.
Electrolytic deburring is suitable for removing burrs from cross holes in hidden parts or parts with complex shapes. It has high production efficiency and the deburring time generally only takes a few seconds to tens of seconds.
It is suitable for deburring gears, connecting rods, valve bodies and crankshaft oil passage openings, as well as sharp corner rounding, etc.
9. High-pressure water jet deburring
Using water as a medium, its instantaneous impact force can be used to remove burrs and flash generated after processing, and at the same time achieve the purpose of cleaning.
Brief comment:
The equipment is expensive and is mainly used in the heart of automobiles and hydraulic control systems of construction machinery.
10. Ultrasonic deburring
Ultrasonic waves generate instantaneous high pressure to remove burrs.




