Oct 12, 2021 Leave a message

What Are The Ways To Reduce The Error That The Cnc Tapping Drilling Machine FANUC May Produce?


When any processing equipment has problems during workpiece processing, such as processing route setting, processing programming, processing tool selection, machine tool problems, clamping problems and workpiece material, etc., it will have a certain impact on the processing accuracy and processing efficiency of the workpiece. cnc tapping drilling machine FANUC is a high-precision and efficient processing equipment. Positioning of the test piece The test piece should be located in the middle of the X stroke, and placed at an appropriate position suitable for the positioning of the test piece and the fixture and the length of the tool along the Y and Z axes.

  The commonly used methods to reduce workpiece machining errors mainly include the original error reduction method, error compensation method, error transfer method, error grouping method, error average method and error synthesis method.

  1. Error average method The error average method uses the mutual comparison and mutual correction between closely related surfaces, or uses each other as a benchmark for processing, in order to achieve the purpose of eliminating processing errors in the drilling and tapping center.


  2. The error synthesis method eliminates the error of the machine tool itself is the main method to ensure the machining accuracy of the workpiece. The error synthesis method requires the measurement of the original errors of each axis of the machine tool. The laser interferometer is now the main testing instrument in drilling and tapping centers due to its high measurement accuracy and flexible use.


  3. Direct reduction of the original error method Direct reduction of the original error method refers to the direct elimination or reduction of the main original error factors affecting the machining accuracy after the identification of the main original error factors. For example, after a long time use of the drilling and tapping center, the transmission system positioning misalignment and backlash caused by natural wear are caused.


4. Error compensation method Error compensation method is to artificially create an error to offset the original error inherent in the process system, or use an original error to offset another original error, so as to achieve the purpose of improving the processing accuracy of the drilling and tapping center workpiece . Usually by reducing the gap of the machine tool, improving the rigidity of the machine tool, using preload, so that the pre-tightening force of the fit is generated, and the effect of the gap is eliminated.


Send Inquiry

whatsapp

skype

E-mail

Inquiry