Feb 08, 2024 Leave a message

Where Does The Electricity For High-speed Rail Come From? Why Does Freezing Rain Cause Widespread Delays On High-speed Rail?

 

Recently, severe weather such as freezing rain and snowstorms has caused widespread delays in high-speed trains in some areas. Do you know why freezing rain causes widespread delays in high-speed trains?

picture

Relevant data show that a high-speed train with a speed of 350 kilometers per hour consumes 9,600 kilowatt-hours of electricity per hour, and a high-speed train with a speed of 250 kilometers per hour consumes 4,800 kilowatt-hours of electricity per hour. A high-speed train traveling at a speed of 250 kilometers per hour from Beijing to Nanjing takes 4 hours and consumes nearly 20,000 kWh of electricity!

picture
So the question is, where does the high-speed rail's electricity come from? What should I do if there is a power outage on the high-speed rail?


1
Where does the electricity for the high-speed rail come from?

First of all, of course, so much electricity still comes from our large power grid. Whether it is power supply by high-speed rail or ordinary residents, electricity is provided by the public power grid. High-speed rail is a special type of customer for power supply companies; power supply for ordinary residents is transmitted and distributed by power supply companies.

For high-speed rail, the power plant generates electricity and sends it to the traction substation (here is a railway asset, run by the relevant railway departments) through transmission lines, and then supplies the electricity to the railway through the contact network. The picture below will help you understand it well~


picture

The EMU traction power supply system generally includes: traction substation (station), contact network, and return circuit.

picture

2
What is the difference between the electricity used in high-speed rail?


If it is different, it is first reflected in the voltage. The voltage used by high-speed rail cannot be found in the grid power supply sequence. Secondly, the AC power in the power grid is three-phase, while the high-speed rail power is single-phase!

In my country's electrified railways, it is the power frequency (50 Hz) 25 (27.5) kV single-phase AC power that is used. This single-phase, 25 (27.5) kV AC power is transmitted from the power grid by the traction substation. Transformed.

3
Is power supply always available during high-speed rail operation?

When high-speed trains, high-speed trains, etc. are traveling, they are not always connected to the power grid. They often pass through a section without electricity (between the traction substation and the power supply arm, called "electrical phase separation"), which is about 100 meters. When passing through this area, the train has no power and usually slides through this area with the help of inertia. Since this section is very short, there is basically no feeling when taking the train.

4
The high-speed rail is out of power, what should you do?

Each EMU car also has its own battery to provide electric energy for pantograph operation when the train starts. It can also be used as an emergency backup power supply for safety and auxiliary electrical systems in the event of a power outage on the high-speed rail.

Recently, there have been some power outages caused by external factors such as weather. Since there is no backup contact line, the repair period is long, and the battery capacity configuration on the vehicle does not take into account the power consumption of the air conditioner.

So the high-speed rail has a power outage, what should we ordinary passengers do?

First, be sure to stay calm. When the car is parked due to a power outage, most of the systems in the car cannot operate. The windows of domestic high-speed trains and high-speed trains are designed to be airtight, and the doors will not be opened unless absolutely necessary.


Secondly, drink drinking water reasonably. In hot and stuffy environments, people lose heat through sweat, and may become dehydrated if they don't replenish enough water.

Finally, adjust your mentality, maintain order, deal with unexpected difficulties calmly, and wait for the power to be restored.


The video explains how the pantograph obtains power from the catenary, and why the pantograph on the car roof cannot be worn out?
Video material, WiFi is recommended to watch

A 10-second video explains why the recent freezing rain weather has caused widespread delays and shutdowns of high-speed rail trains?


Freezing rain diagram:

picture


When extremely severe weather such as freezing rain occurs, the contact network is easily damaged, and the pantograph is also easily damaged and broken by freezing rain. The video is as follows:


Therefore, when extremely severe weather such as freezing rain occurs, the speed of high-speed rail operations is reduced, and large-scale delays or even shutdowns are mainly from the perspective of safety.

 

Send Inquiry

whatsapp

skype

E-mail

Inquiry