CNC Center

Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of cnc center in China. If you're going to wholesale high quality cnc center made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

1. The main structural castings of CNC Center, in addition to being made of high-quality cast iron, have been tempered to eliminate internal hardness: advanced scientific finite element analysis is used to simulate the structural rigidity of the computer to ensure mechanical rigidity and stability. And earthquake resistance.

2. The three-axis motor and ball screw adopt direct drive, pre-tension, no backlash

3. The precision ball screw is modular assembly. The parallelism and perpendicularity of the ball screw are precisely calibrated to within +-0.01mm (full length).

4. Spindle cooling system-the spindle oil temperature cooler is used to provide warm operation of the spindle to extend the life of the spindle. In addition, the machine exhibits high efficiency and high precision machining characteristics

5. High rigidity spindle-the spindle adopts P4 super precision bearings, which is suitable for various precision machining and high-speed cutting

6. The spindle head adopts a circulating oil cooling system to effectively avoid thermal expansion problems and ensure machining accuracy

7. Automatic lubrication system-the lubrication system can automatically measure the amount of oil, and accurately supply oil to the oil distributor, ball screw and slide rail.

8. Outer cover sheet metal-fully enclosed shield meets environmental protection requirements and CE standards, while providing operators with a more comfortable operating environment.

9. A full set of strict quality inspections: laser inspection, Ball Bar round inspection, heavy cutting test, 3D semi-circular three-dimensional mold cutting test, 45-degree parallel milling and 2D circular cutting.

1. The Z-axis adopts high-rigidity roller linear rails to increase the load and rigidity of the Z-axis.

3. X/Y/Z three axes all adopt linear slides, which have high rigidity, low noise and low friction characteristics, which can make rapid displacement and obtain circular tracking accuracy.

4. Driven by a powerful and high-performance servo motor, the fast feed can reach up to 36 m/min, and the movement is smooth, which effectively improves the processing efficiency and stability

5. Equipped with C3 grade large diameter (X.Y, Z: Ø40) high-precision ball screw to ensure the highest accuracy and durability. The three-axis motor end uses 4 bearings respectively, which further strengthens the stability and accuracy of the machine during rapid displacement.

6. The machine adopts a unique tail end structure design. Separate bearing sleeves are used at the tail end to efficiently adjust the accuracy of the tail and improve assembly efficiency and machine quality.

7. The machine is equipped with an anti-collision device, which can absorb the vibration generated by the impact and ensure the accuracy.

8. The linear rail adopts Taiwan HIWIN ball linear slide, and the Z axis uses super-loaded heavy-duty roller linear slide. After the three-axis complete design and matching, the three-axis rapid feed speed is as high as 36m/min.

9. Built-in counterweight cylinder: to ensure that the Z axis does not shake when it moves quickly, ensuring accuracy.

Reduce the weight of the screw, reduce heat generation, and effectively improve the accuracy and service life. At the same time, the load of the servo motor is reduced, power consumption and heat generation are reduced.

10. The Z-axis, VL-8i reinforced configuration is supported by 6 sliding blocks, which greatly improves the stability of the machine head transmission.

11. The reasonable head structure has good rigidity and reasonable weight.

12. The ratio of the contact length between the main shaft and the column is appropriate to provide a stable support for the main shaft.

CNC center parameters 

CNC center standard some parts :

Spindle group

Taiwan-made pressurized cylinder

Lead screw

Bearing

Coupling

Tool magazine

Cooling pump

Lubrication pump

Ball screw,

Line rail stainless steel rail protection

Main power switch

Contactor

CNC system

The complete set of high-stability CNC system purchased from the original has a fully digital structure and powerful processing capabilities. Brand CNC system, optional GSK, SYNTEC, Japan FANUC, Mitsubishi, etc.

Spindle tool magazine

Taiwan brand tool magazine, cam mechanical rotary tool change, accurate tool change and high efficiency.

The tool magazine is equipped with a high-strength tool magazine seat to ensure the stability of the tool change, and is equipped with a pneumatic tool magazine door to effectively prevent the coolant and iron filings from entering.

Automatic lubrication

Perform timing and quantitative automatic lubrication of functional components such as ball screw pairs and linear guide pairs of each coordinate axis.

Integrated pneumatic board

The spindle, tool magazine, pneumatic components, etc. are integrated and unified management, and the layout is clear and easy to operate. The pneumatic panel is located at the back of the machine tool, with built-in pipeline layout, and the appearance is simple and neat.

Power Systems

The stable power system adopts Schneider, Delixi and other brand electrical appliances with stable performance to ensure the normal operation of the machine.

CNC center  accessories tools :

spring

Chuck

Knife handle

Circlip

Rivet

Allen wrench

—Word screwdriver

Phillips screwdriver

Hot Tags: cnc center, China, suppliers, manufacturers, factory, price, for sale, made in China, Best Vertical Machining Center, 5 Axis Cnc Machining Center