Gantry Cnc Machine
Y Cross travel(Y-axis) m'm 1500
Z Vertical travel(Z-axis) m'm 800
Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of gantry cnc machine in China. If you're going to wholesale high quality gantry cnc machine made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.
| The Gantry cnc machine it's main body is made of Meehanite cast iron, which is highly rigid, wear-resistant, and can withstand large loads and impacts | ||||||||||
| Spindle is made of molybdenum-molybdenum steel SCM-21, which is precision ground after tempering and nitriding treatment, rigid and tough, and resistant to heavy cutting | ||||||||||
| Spindle is equipped with P4 grade bearings, with good precision and strong stability | ||||||||||
| The XY axis adopts roller guide rails, the Z axis slide guide (boxguideway), the mounting surface is treated with high frequency heat treatment and grinding, and the nitrogen gas counterweight is configured. |
| Parameter ： | |||||||||||
| Mode/specifation | Unit | JD-2015 | |||||||||
| Table | |||||||||||
| Work table size | m'm | 2100*1200 | |||||||||
| T-slot number | m'm | 7*22*150 | |||||||||
| Max load | k'g | 4000 | |||||||||
| Travel | |||||||||||
| X Lingintdina(X-axis) | m'm | 2000 | |||||||||
| Y Cross travel(Y-axis) | m'm | 1500 | |||||||||
| Z Vertical travel(Z-axis) | m'm | 800 | |||||||||
| gantry width | m'm | 1520 | |||||||||
Distance from working table to spindle nose |
m'm | 170-970 | |||||||||
| Spindle | |||||||||||
| Spindle taper /dim | BT50(Ø190) | ||||||||||
| Max.spindle speed | r'p'm | 8000 | |||||||||
| Spindle transmission | Belt | ||||||||||
| Feed | |||||||||||
| Cutting feed | m/min | 15 | |||||||||
| Raprid cutting feed | m/min | 32 | |||||||||
| Auto tool change | |||||||||||
| The knife handle pattern | BT50 | ||||||||||
| Tool storage capacity | 24T | ||||||||||
| Tool change control md | ●mechanical | ||||||||||
TOOL |
Max tool length | mm | 300 | ||||||||
| Max tool weight | kg | 12 | |||||||||
| NC system configration | |||||||||||
Sp drive motor power / speed |
kw | 15kw,ßiI15/8000 | |||||||||
XY axis Servo drive motor power/model |
kw | ßiS40/3000 | |||||||||
Z axis Servo drive motor power/model |
kw | ßiS40/3000 | |||||||||
| Servo drive model | System All-in-One Driver | ||||||||||
| Guide rail and screw configuration | |||||||||||
| X axis guide rail type | 45 rollers 2 pcsguideways, 8 sliders | ||||||||||
| Y axis guide rail type | 45 rollers 2 pcsguideways, 6 sliders | ||||||||||
| Z axis guide rail type | sliding guideway (boxguideway) | ||||||||||
| X axis ball screw spec | mm | Taiwan HIWIN Ø50*12 | |||||||||
| Y axis ball screw spec | mm | Taiwan HIWIN Ø50*12 | |||||||||
| Z axis ball screw spec | mm | Taiwan HIWIN Ø50*12 | |||||||||
| XYZ axis bearing brand | Germany FAG P4 level | ||||||||||
| Machine weight and floor area | |||||||||||
| Area covered | mm | 6600*2550*2480 | |||||||||
| Machine gross weight | kg | 16500 | |||||||||
| Accuracy | |||||||||||
| positioning accuracy | mm | ±0.005 | |||||||||
| Repeatability | mm | ±0.003 | |||||||||
| Power and air pressure demand | |||||||||||
| Power demand | KVA | 40 | |||||||||
| Air pressure re'qu'irment | kgf/cm2 | 7 | |||||||||
| Specification/brand | |||||||
| Standard | 1 | NC System | |||||
| 2 | Fuselage | ||||||
| 3 | Spin'd'le | ||||||
| 4 | Three axis screw | ||||||
| 5 | guideway | ||||||
| 6 | Three axis motor | ||||||
| 7 | Three axis drive | ||||||
| 8 | Coupling | ||||||
| 9 | Oil cooler | ||||||
| 10 | Servo shaft bearing | ||||||
| 11 | Shell sheet metal | ||||||
| 12 | The level of bolt and anchor | ||||||
A, The above Gantry cnc machine body configuration is a belt-type 8000-rpm spindle, double work lights, and double water pumps.
B, The above configuration reserves the PLC software and control circuit of the fourth axis.
C, CNC system: Japan FANUC 0I-MF system, 10.4-inch screen, spindle motor: 15KW, ßi15/8000
XYZ axis motor: ßiS40/3000
Hot Tags: gantry cnc machine, China, suppliers, manufacturers, factory, price, for sale, made in China, CNC Gantry Type Machining Center, CNC Double Column Machining Center, 5 Axis Gantry Type Machining Center, CNC Double Column Milling Machine
You Might Also Like
Send Inquiry