
Gantry Type Vertical Machining Center
Y-axis travel 1800 ㎜
Z-axis travel 800 ㎜
Gantry width 1800 ㎜
Maximum height over workpiece size 1300 ㎜
Distance from spindle end face to work table 180-980 ㎜
Workbench Workbench area
2200×1500 ㎜
Maximum load capacity (table maximum load) 5000 kg
Dongguan Jide Precision Machinery Technology Co., Ltd. is one of the most credible manufacturers and suppliers of gantry type vertical machining center in China. If you're going to wholesale high quality gantry type vertical machining center made in China, welcome to get quotation and free sample from our factory. All customized products are with high quality and competitive price.

Gantry type vertical machining center
Three-axis rapid movement/high speed and high precision

Description of functions and features
1.1 Purpose of machine tool
Gantry type vertical machining center is mainly suitable for parts processing in aviation, aerospace, automobile, military industry, energy, information, mold and other industries. It is aimed at processing small and medium-sized complex parts of ferrous and non-ferrous metals. It has the characteristics of high precision, high speed, high flexibility and environmental protection. Its performance index and precision index fully comply with the national standard. After modular design, the products can be serialized and customized according to market demand. Its good performance-price ratio is the best choice for domestic and foreign customers.
The design of the machine tool conforms to the ISO international standard, and the measurement units of all parts, components and various instruments adopt the International System of Units (SI) standard.
1.2 General layout of the machine tool
It adopts the layout form of moving workbench, fixed beam, gantry frame structure, and double columns sitting on both sides of the bed.
1.3 Spindle box
(1) The spindle box adopts a 350×350 square ram, and the Z-axis guide rail pair is four 45-width roller-type linear guide rails, two at the back and one at the left and right to ensure smooth cutting and precision during processing.
(2) Z-axis drive - the servo motor is directly connected to the ball screw through a coupling, and the ball screw drives the headstock to move up and down on the saddle to realize Z-axis feed. The Z-axis motor has an automatic brake function. In the event of a power failure, the automatic brake will hold the motor shaft tightly so that it cannot rotate.
(3) The main shaft group is produced by Taiwan professional factory, with high precision and high performance. The main shaft grabs the knife by the butterfly spring on the main shaft acting on the pull stud of the tool handle through the four-petal claw broach mechanism with the tension force.
(4) The machine tool has the function of spindle orientation.
1.4 bed - workbench
(1) The bed table, including the columns, beams, saddles, headstock and other large parts described later, are all cast with high-strength cast iron materials and resin sand technology. These large pieces are designed with computer-assisted three-dimensional software, and the arrangement of ribs is reasonable to improve the rigidity of the large pieces.
(2) Lathe bed—the X-axis guide rail pair of the worktable adopts two 55-wide imported heavy-duty linear rolling guide rails, which have small friction coefficient, high sensitivity of the workbench, small high-speed vibration, no crawling at low speed, high positioning accuracy, and excellent servo drive performance ; At the same time, the bearing capacity is large, and the cutting vibration resistance is good, which can improve the performance characteristics of the machine tool, improve the accuracy and precision stability of the machine tool and the service life of the machine tool.
(3) X-axis drive - the servo motor is directly connected to the ball screw through a coupling, driving the worktable to move back and forth on the bed, realizing the X-axis feed movement, and pre-stretching the screw to improve the screw the stiffness of the pair.
1.5 Beam
(1) To meet the heavy-duty cutting of the machine tool, the beam adopts a large cross-section and has sufficient bending rigidity and torsional rigidity.
(2) The beam guide pair adopts three imported heavy-duty rolling linear guides with a width of 45.
(3) Y-axis drive—the servo motor is directly connected to the ball screw through the coupling, and the ball screw drives the saddle to move left and right on the beam to realize the Y-axis feed movement.
1.6 Cooling chip removal system
A high-lift cooling pump is used with a lift of 30 meters.
1.7 Pneumatic system
It is mainly used for loosening and clamping the spindle; air blowing at the center of the spindle; air blowing at the front end of the spindle, etc.
1.8 Lubrication system
(1) The three coordinate bearings are grease lubricated.
(2) The ball screw pair adopts automatic thin oil lubrication.
(3) The X, Y, and Z coordinate guide rails are linear rolling guide rails, and the automatic thin oil lubrication method is adopted. After the lubricating oil is divided by the shunt, it is connected to each slider for lubrication.
1.9 Machine tool protection
The bed guide rail (X-axis) of the machine tool adopts an anti-rust metal telescopic protective cover; the beam guide rail (Y-axis) adopts an organ-type protection; Work in a comfortable environment.
1.10 Chip removal system
The processed iron chips on the table are transported to the chain chip conveyor at the front of the bed through the spiral chip conveyors on both sides of the bed, and then the chips are sent to the trolley by the chain chip conveyor.
1.11 The CNC cabinet of the machine tool is equipped with a dust-proof and dehumidifying air-conditioning device, so that the CNC system can work in a dust-proof and temperature-controlled environment to ensure its long-term reliability.
1.12 CNC system
FANUC 0i-MF PLUS (5 packs) CNC system from FANUC Japan, FANUC digital AC spindle amplifier and digital AC spindle servo motor, FANUC digital AC feed amplifier and digital AC feed servo motor.
Gantry type vertical machining center Hardware configuration
Number of control axes: X, Y, Z, B four coordinate axes and one spindle
Number of linkage axes: X, Y, Z three-axis linkage;
Display: 10.4″ color LCD, the display text is Chinese/English, which can be switched online
Operation panel: full-featured CNC keyboard
parts counter
Processing timer
PMC: built-in PMC SB7, 24000 steps
CNC user memory capacity: 512 KB, equivalent to 1280 m paper tape, for storing applications and data
CNC function
Minimum pulse equivalent: linear axis 0.001 mm, rotary axis 0.001°

After-sales service
Full tracking professional services
Online and offline double protection
We adhere to the "one-to-one customer service tracking service"
Offline is a strong support for online, professional operation team
system, from the moment you place an order until the signing of the product
7*16 hours customer service online, to solve problems for you, dedicated
Accept, our professional customer service will follow up the whole process one-on-one
After-sales service, rest assured to buy!
tracking service.
Hot Tags: gantry type vertical machining center, China, suppliers, manufacturers, factory, price, for sale, made in China, CNC Gantry Type Machining Center, CNC Double Column Machining Center, CNC Double Column Milling Machine, 5 Axis Gantry Type Machining Center
You Might Also Like
Send Inquiry










