Advantages of cnc machining center 1370 spindle coolant thru

Advantages of cnc machining center 1370 spindle coolant thru

The transmission mode of the main shaft of the machining center includes belt transmission and direct transmission. The speed of belt drive is slower than that of direct drive. Under normal circumstances, the machining center will be equipped with a belt-driven spindle, and the speed can generally reach 8000 rpm. Directly connected spindles generally can reach more than 10,000 revolutions. But the spindles of these two transmission modes can choose the configuration of the water outlet from the center of the spindle. The spindle equipped with the machining center has many advantages with a central water outlet, and the price of the machining center will also increase. What are the advantages of the water outlet of the spindle center of the machining center? As a professional processing center manufacturer, the company’s technicians will give you a brief list:

Advantages of the water outlet of the spindle center of the machining center:

1. Greatly reduce the wear of the tool during cutting and save the cost of the tool;

2. It can improve the entanglement of iron filings produced by cutting, which is conducive to automatic introduction;

3. The water flow from the spindle center of the machining center greatly improves the stability of the cutting dimension during machine tool processing, and at the same time increases the qualification rate of the workpiece;

4. Water from the center of the spindle improves the cooling effect, greatly prolongs the service life of the tool and the stability of the processing quality of the workpiece;

5. The filter cartridge finely filters, optimizes the cutting water quality, and avoids the blockage of the circulation pipeline;

6. The water outlet function of the spindle center of the machining center effectively improves the drilling depth and cutting speed of the machine tool.