Threaded connections are widely utilized fastening structures within the industrial sector. In military-grade models and products, over 80% of structural connections are achieved through threading; consequently, the conformity of these threads directly impacts both the assembly performance and operational safety of the equipment.
01
Domestic Standards for Thread Inspection
Standard GB/T 197–1981, *General Purpose Metric Screw Threads-Tolerances*, establishes the criteria for determining the conformity of a thread's pitch diameter. Specifically, it stipulates that the *actual effective pitch diameter* of a thread must not exceed the pitch diameter of the *maximum material limit profile*, while the *single pitch diameter* at any specific point on the actual thread must not exceed the pitch diameter of the *minimum material limit profile*.
Therefore, utilizing the pitch diameter of the maximum material limit profile as the boundary value serves as the sole basis for determining whether an actual thread is capable of proper engagement. The "Go" thread gauge is designed precisely in accordance with this boundary value. In other words, employing a "Go" thread gauge to inspect the effective pitch diameter of a thread effectively guarantees its assemblability.
Currently, the vast majority of thread inspections in my country are conducted based on this "principle for determining pitch diameter conformity"-specifically, by employing the traditional "Go/No-Go" gauging method. However, during routine thread inspections, disputes regarding the application and usage of these gauges frequently arise.
To resolve disputes stemming from the use of gauges in varying states of wear-where the actual limit dimensions of the gauge threads (reflecting the difference between new and worn conditions) diverge-Standard GB/T 3934–1983, *General Purpose Metric Screw Threads-Gauges and Gauging* (equivalent to ISO 1502), establishes distinct categories: "Acceptance Gauges" and "Working Gauges."
"Acceptance Gauges" refer to the thread gauges utilized by inspection departments or user representatives when formally accepting finished workpieces; "Working Gauges," conversely, are typically employed for thread inspection purposes during the actual production process. The guiding principle for the application of these two gauge categories is as follows: for "Working Gauges," a new or relatively new "Go" gauge is paired with an old "No-Go" gauge (or one approaching its wear limit); conversely, for "Acceptance Gauges," an old "Go" gauge (or one approaching its wear limit) is paired with a new or relatively new "No-Go" gauge. 02
Common Inspection Methods
In the measurement of thread parameters, based on the type of measuring equipment used, thread measurement methods can be broadly classified into the following categories:
(1) Thread Go/No-Go Gauge Inspection Method
[Image]
The traditional Go/No-Go gauge inspection method, based on Taylor's Principle, can only satisfy the minimum requirements for thread inspection. The advantages of this method are that it is fast, economical, and practical. For enterprises with advanced manufacturing capabilities-specifically those utilizing qualified thread-forming tools and specialized thread-processing equipment (such as taps, dies, thread rolling machines, and thread chasing machines)-the quality of the threads can be effectively controlled.
The primary disadvantage of this inspection method is that it provides only a qualitative assessment of whether the thread pitch diameter is acceptable; it merely indicates whether the pitch diameter falls within the range defined by the minimum single pitch diameter and the maximum functional pitch diameter, but it cannot determine the specific numerical value of the thread dimensions. Furthermore, parameters such as flank angle errors, pitch errors, and various form errors cannot be individually quantified or controlled using this method.
(2) Thread Micrometer
[Image]
The thread micrometer is a specialized type of screw micrometer. It features a unique measuring head designed to conform precisely to the thread profile: one contact point is a V-shaped anvil that mates with the thread crests, while the other is a conical spindle tip that mates with the thread roots. The micrometer comes with a set of interchangeable measuring heads, where each specific pair of heads is designed to measure threads within a particular pitch range.
According to the technical specifications of the thread micrometer, its maximum combined error is ±0.028 mm. However, due to inherent angular errors in the measuring contacts-and given that the pitch and flank angles of the external thread being measured may also contain significant errors-the measurement uncertainty for the pitch diameter can reach as high as 0.10 mm when using the absolute measurement method. Consequently, this method is typically employed for measuring the pitch diameters of external threads on workpieces where high precision is not a critical requirement.
(3) Three-Wire Method
[Image]
The three-wire method utilizes a set of three measuring wires-specifically selected to have a precise and identical diameter-to measure the thread pitch diameter indirectly. By placing three measuring wires into the thread grooves on both sides of the helix, and using a lever micrometer to measure the overall outer diameter, the single pitch diameter of the thread can be calculated based on the functional relationship between the pitch diameter, the wire diameter, the thread profile angle, and the pitch. To simplify the calculation process, measuring wires of appropriate diameters should be selected.
(4) Gauge-type Comprehensive Thread Measuring Instrument
[Image]
[Image]
[Image]
This high-precision comprehensive thread measuring instrument employs a contact-based method. Compared to traditional and non-contact measurement techniques, it offers significant advantages and practical feasibility. It boasts high accuracy, ease of use, and powerful functionality, making it an invaluable tool for thread metrology.
(5) Optical Imaging Method
[Image]
Common inspection equipment utilizing the optical imaging method for thread measurement includes profile projectors and universal tool microscopes. A profile projector measures various thread parameters-such as the overall outer diameter-by projecting an enlarged silhouette of the workpiece and employing visual alignment and coordinate translation. However, due to its reliance on visual boundary alignment-combined with inherent limitations in measuring the pitch diameter-the accuracy of the projection method is generally quite limited.
The universal tool microscope utilizes an optical system to project the thread profile into the eyepiece's field of view. By employing grating scales for precise translation, it can be used to verify various thread parameters; notably, the ability to tilt the lens effectively addresses the issue of the thread's helix angle, thereby enabling higher measurement accuracy for threads.
(6) Laser Triangulation Method
[Image]
Laser triangulation has garnered widespread attention as another non-destructive testing method. It is primarily based on the principles of traditional optical triangulation; by capturing a dataset of coordinate points representing the axial cross-sectional profile of the thread surface, it allows for the subsequent calculation of various thread parameters.
This measurement method features non-contact operation, high precision, and ease of control, and is also applicable to the high-speed measurement of micro-scale dimensions. However, the method is susceptible to environmental factors-such as temperature-and the surface characteristics of the object being measured; consequently, these influencing factors must be carefully taken into account during the subsequent data and image processing stages.
(7) Measurement via Coordinate Measuring Machine (CMM)
[Image]
Coordinate Measuring Machines (CMMs) are widely utilized across industries such as machinery manufacturing, automotive, aerospace, defense, and mold making. They are employed to measure a diverse range of components and features, including housings, frames, gears, cams, worm wheels, worm screws, blades, curves, and complex contoured surfaces. Numerous methods have been developed for measuring thread parameters by retrofitting Coordinate Measuring Machines (CMMs).
However, the CMM is a widely utilized, general-purpose device; it typically lacks probes specifically designed for thread measurement, necessitating the use of custom-made probe heads for small-sized threads. Furthermore, software development is constrained by the CMM's inherent software platform, making it difficult to implement a customized contour-following control system tailored to the specific geometric morphology of threads. Moreover, the cost associated with CMMs is significantly higher than that of specialized thread-measuring equipment.
(8) Stylus-Scanning Thread Profile Measuring Instrument
[Image]
The stylus-scanning thread profile measuring instrument operates by continuously scanning the upper and lower contour surfaces of a thread's axial cross-section. Based on the resulting contour data, it then calculates various thread parameters, such as the pitch diameter, major diameter, minor diameter, pitch, flank half-angle, and taper.





