Friends who are familiar with the tool industry should know that tungsten steel cnc end mill is very important to the tool industry. Because tungsten steel uses a lot of raw materials in the tool industry, its significant advantages determine its application, so that tungsten steel cnc end mill has been well developed, so tungsten steel materials have also been reused. But many people have a lot of problems when choosing tungsten steel cnc end mills, that is, how to choose high-quality tungsten steel cnc end mills? What should you pay attention to when choosing tungsten steel cnc end mills? Next, let’s just talk about tungsten steel. Attention to the selection of cnc end mill, I hope everyone can learn the skills to choose the tungsten steel cnc end mill tool that suits you.
We remind that when choosing a cnc end mill made of tungsten steel, in addition to learning to distinguish the authenticity of tungsten steel, you also need to pay special attention to the following matters:
1. Pay attention to the clamping of cnc end mill
At present, most of the ways of processing end mills are spring clamps and sleeve clamps, which are in a cantilever state when used. In the process of milling processing, sometimes the end milling cutter may slowly protrude from the tool holder, or even fall completely, resulting in a situation where the parts are scrapped. This is usually caused by the small hole in the tool holder and the end milling cutter. There is an oil film between the outer diameters of the tool holder, resulting in insufficient clamping force.
2. Pay attention to the vibration of cnc end mill
Because there is a very small gap between the end mill and the tool holder, it is very likely that vibration will occur during the processing of the tool. Vibration will cause the unevenness of the end mill's circumferential edge, and the cutting and spreading amount will be much larger than the originally set value, which will interfere with the accuracy of the machining and the life of the tool.
3. Pay attention to the cutting of the cnc end mill
When the CNC milling cutter for the cavity of molds and other parts is processed, when the position to be cut is a downward recessed part or a deep cavity, the extension of the end mill needs to be increased. If a long-edged end mill is used, the deflection of the inner tool is relatively large, which is prone to vibration and cause damage to the tool.





