People in today's society like customized versions, and there are also processing customizations in the circle of aluminum profiles. Customized aluminum profiles generally need to be processed by machining centre in cnc, but it is impossible to do nothing in the process of processing. Any problems, there will be problems of this kind in reprocessing. Today, let’s talk about how to deal with the collision caused by the operator in the machining centre in cnc machining process?
First of all, the impact caused by the operator during the machining centre in cnc processing is mainly due to the following reasons:
1. First of all, the first point is due to the wrong Z-axis tool setting of the depth, this problem will cause this phenomenon;
2. Then the second point is mainly due to errors in the number of points and operations that cause this problem;
3. The third point should be the wrong use of the knife;
4. The fourth point is that the program is wrong;
5. The fifth point is mainly that the handwheel is turned in the wrong direction during manual operation;
6. In the end, it may be caused by pressing the wrong direction during manual rapid feed;
So how to avoid the above problems in machining centre in cnc processing:
1. First of all, for the problem of Z-axis tool setting error, you must pay attention to the position of the tool when processing;
2. Repeated inspections must be performed after the number of hits and operations are completed;
3. In the process of clamping the tool, it is necessary to repeatedly check with the program sheet and the program before loading;
4. During the machining centre in cnc processing operation, the program should go one by one in order;
5. When manually operating in the machining centre in cnc processing, the operator should strengthen the machine's operating proficiency by himself;
6. When moving quickly manually, you can raise the Z axis to the part before moving;
