Everyone knows that cnc vertical machining center china processing is very hot now, but in the process of processing, there are often some problems of this kind or that which cause the processed products to be counterproductive. The problem to be discussed today is mainly the overcutting of the workpiece. Of this problem.
Regarding the problem of over-cutting of the workpiece, the main reasons for this problem are as follows:
1. First of all, the strength of the tool is not enough, whether it is too long or too small, it will cause the tool to appear snapped;
2. Then it is caused by the irregular operation of the operator
3. If the cutting margin is not uniform enough, it will also cause the workpiece to overcut.
4. Improper setting of cutting parameters, improper setting of cutting parameters can also cause this reason, for example, the tolerance of the setting is too large, or the SF setting is too fast
In view of the problem of overcutting with the workpiece, how can we improve it:
1. First of all, when choosing a tool, try to follow the rules that can be big or not, and can be short and not long.
2. Then when adding programs, keep the margin as even as possible
3. The cutting parameters must be adjusted reasonably, and the corners with large margins should be rounded
4. When using the SF function of the equipment, the operator can fine-tune the speed so that the CNC machine tool cutting can achieve better results
In summary, it is about the causes and solutions of workpiece over-cutting in the process of CNC vertical machining center china processing. However, in the process of CNC vertical machining center china processing, in addition to the workpiece over-cutting, there will be tool setting failures. In the next issue, the impact caused by the operation and so on, continue to discuss in the next issue!
