Knowledge

Interference fit, transition fit, and clearance fit are the three basic fit relationships in mechanical design. Many people only consider tighter fit for interference fit, looser f

a popular blogger with millions of fans, disassembled the Mate XT and expressed his amazement at the internal craftsmanship while disassembling it. Today, the editor will take you

Nowadays, difficult-to-process materials are widely used in the manufacturing industry. Their poor processing performance and the structural complexity and high material removal ra

1. What are the three methods of workpiece clamping? {1. Clamping in the fixture; 2. Direct alignment clamping; 3. Scribing alignment clamping}2. What does the process system inclu

1. Determine the installation height and position of the wedge through the cross section 1) The position of the punch is roughly determined, and the angle and position of the die s

There are many varieties and specifications of CNC machine tools, and the classification methods are also different. Generally, they can be classified according to the following fo

This article compares the control system solutions of two industrial robots, the manipulator and the mobile robot, and introduces their characteristics. The above classification is

Tool setting is the main operation and important skill in CNC machining. Under certain conditions, the accuracy of tool setting can determine the machining accuracy of parts. At th

Importance of sample pretreatment Sample pretreatment is a time-consuming and error-prone step in instrumental analysis (especially chromatographic analysis). The quality of sample

On-site observation is the basis for continuous improvement of the factory. Toyota factory has taken on-site observation to the extreme. Even on the factory's rest day, the fac

Business operations must rely on accurate planning and timely and effective execution and management. Otherwise, the precious funds and resources invested will be quickly consumed,

The precision reducers used in industrial robots around the world are basically monopolized by Japan. In recent years, although there are also mass-produced RV reducers in China, f