Knowledge

The liquid level switch, as the name suggests, is a switch used to control the liquid level. In terms of form, it is mainly divided into contact type and non-contact type. Non-cont

1 square wire, 1.5 square wire, 2.5 square wire, 4 square wire, 6 square wire, etc. How many watts can these wires carry? This is what everyone is more concerned about. Let's take

The process method that uses modern physics, chemistry, metallurgy, heat treatment and other disciplines to change the condition and properties of the surface of the part and optim

In an AC circuit, there are two types of electrical power supplied to the load by the power supply: one is active power and the other is reactive power. The voltage and current are

Today, the editor will share the sealing failure modes of O-rings and corresponding countermeasures. O-ring sealing principle In general, O-rings achieve reliable sealing effects t

proe function formula Name: sine curve Establishment environment: Pro/E software, Cartesian coordinate system x=50*t y=10*sin(t*360) z=0 Name: Helical curve Creation environment: P

In recent years, five-axis linkage CNC machining centers have been increasingly widely used in various fields. In practical applications, whenever people encounter problems with ef

Q345 is a steel material. It is low alloy steel (C<0.2%) and is widely used in buildings, bridges, vehicles, ships, pressure vessels, etc. Q represents the yield strength of thi

The mainstream transmissions currently used in cars include AT transmissions, DCT (or DSG) transmissions and CVT transmissions. Among them, AT gearboxes are more common, DCT (or DS

For a long time, many people in the industry have believed that cemented carbide is tungsten steel. Today we will talk about the difference between cemented carbide and tungsten st

The so-called deep hole is a hole whose length to hole diameter ratio is greater than 10. In most cases, the depth-to-diameter ratio of general deep holes is L/d≥100. Such as cy

A simple example used in macro programming will now be used to illustrate the similarities and differences between macro programs and NC programs. A company mainly performs medium-