Knowledge

Why do we think titanium alloy is a difficult material to machine? Because there is a lack of deep understanding of its processing mechanism and phenomena. 1. Physical phenomena of

The factory uses precision CNC machine tools (machining centers, EDM, slow wire-traveling machine tools, etc.) for high-precision processing. Do you have this experience: when the

Isn't the faster the CNC tools used in machining centers, the better? Why do they need to be passivated? In fact, tool passivation is not what everyone understands literally, but a

1 Influence on cutting temperature: cutting speed, feed rate, back cutting amount. Influence on cutting force: back cutting amount, feed rate, cutting speed. Influence on tool dura

The first thing to understand is the characteristics of oil-based and water-based cutting fluids. Generally speaking, oil-based cutting fluids have good lubrication properties, whi

In drilling, the most troublesome thing is that the machining chips get wrapped around the tool. If these long chips are not removed in time, it will not only affect the normal pro

To judge the level of a machine tool, it depends on its repeated positioning accuracy. If the repeated positioning accuracy of a machine tool can reach 0.005mm (ISO standard, stati

G00 Fast moving positioning G00 X__Y__Z__; G01 Linear interpolation mode G01 X__Y__Z__; Corner chamfer mode G01 X__Y__C__; G01 X__Y__; C: The distance from the imaginary corner to

Germany and China both have high levels of mold manufacturing, but there are certain differences in some aspects. German mold companies lead the way in technological innovation, pr

Recently, some users have reported that when the spindle I bought from you, the machine tool vibrates very obviously when the speed is above 3,000 rpm, and the spindle makes a whis

The weather is gradually getting colder, and it is the season when rats are frequently seen. Machine tool electrical cabinets are relatively warm. Rats like to stay inside and even

Recently, some users have reported that when the spindle I bought from you, the machine tool vibrates very obviously when the speed is above 3,000 rpm, and the spindle makes a whis