As the Spring Festival is approaching, in order to ensure that the engraving machine runs normally after the holiday and quickly resume production, the equipment must be shut down for maintenance before the holiday.
01. The machine tool lubrication implements the "machine tool full stroke lubrication function", so that the guide rail and the lead screw are fully lubricated.
02. Clean the electric spindle. Clean the cone hole of the electric spindle, apply oil to prevent rust, and seal it with plastic wrap to prevent external dust from entering the cone hole of the electric spindle.
03. Cleaning the machining area of the machine tool focuses on cleaning the T-slots, fixtures, and bed areas of the workbench where residues and debris are easy to stay. Wipe all exposed surfaces until there is no accumulation of cutting fluid and chips. The workbench and tooling fixtures are coated with oil to prevent rust.
04. Clean the tool magazine and tool holder. Remove all tool holders (including the upper tool holder of the electro-spindle), and clean the tool magazine, mechanical arm claws and tool holders until there is no cutting fluid and chips. The handle of the knife is oil-coated to prevent rust and sealed and stored in the warehouse.
05. Clean the machine tool accessories to clean the cutting fluid tank, pump the cutting fluid into the collection container, and flush the cutting fluid tank to ensure that there is no residual fluid and residue. Dry the box, motor and pump body.
Clean the filter screen of the refrigerator, and connect the oil mist collector to the oil bottle.
06. Drain the cooling liquid. Drain the cooling liquid in the refrigerator, electric spindle, and electric control cabinet heat exchanger.
07. Cut off the power and air source of the machine tool to return the A/B, C, and Z axes to the origin, and move the X and Y axes to the middle position of the stroke of each axis. Close the door of the machine tool, power off the machine tool, and completely cut off the power and air supply.
08. Take dust-proof measures to clean up the dust accumulated on the top of the machine tool and the surrounding area. If conditions permit, the machine tool can be covered with tarpaulin or machine tool packaging plastic bag to prevent dust and moisture.
09. Keep the dongle properly to prevent loss.





